Among the small maintenance works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Nissan Juke is one of the great classics. Although this work is basic to do, some of you are most probably concerned about why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Nissan Juke? We will now answer these questions.
Advantage to always have the brake fluid level up in your Nissan Juke
So we start our article content with the interest of verifying the brake fluid level on a Nissan Juke. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your vehicle. However, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is consequently necessary to verify the brake fluid level of your Nissan Juke on a regular basis (every 10,000km for example). It is also beneficial to flush the system every 50,000km because as time passes the brake fluid will lose its properties. This operation is particularly simple and does not require evolved expertise of mechanics, so it is easy for all Nissan Juke owners to do it themselves. If the Brake light on the dashboard of your Nissan Juke does not correspond to a lack of brake fluid, do not be reluctant to read our article content for details. However, there are some measures and rules to respect that we will see in the following section of this article content.
How to fill up the brake fluid of a Nissan Juke
So now we will show to you how to do the brake fluid level on a Nissan Juke. Please notice that this is very basic to carry out. However, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this info in the user manual of your Nissan Juke. Now here are the steps to adhere to to make your level:
- Open your hood and locate your brake fluid reservoir, it is very easy to identify, it is generally made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
- Once discovered, browse the instructions on the cap cautiously so as not to make any problems during the operation, we advise you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Nissan Juke up to the mark “Max”.
- If the level was under the “Min” mark before you examined the brake fluid level in your Nissan Juke, make sure you verify the level in a few days/weeks to be certain you don’t have a leak in the brake system
That’s it, you now have all the info you need to securely fill the brake fluid level of your Nissan Juke.
In the event that you have any additional questions about the Nissan Juke, do not hesitate to consult our Nissan Juke category.