Among the small routine service acts that you should do on a consistent basis on your car, to fill up the brake fluid level of your Mercedes Classe Cls is one of the great classics. Nevertheless this act is elementary to do, some of you are almost certainly wanting to know why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Mercedes Classe Cls? We will now answer these questions.

check-brake-fluid-level-mercedes-classe-cls

Advantage to always have the brake fluid level up in your Mercedes Classe Cls

So we start our content page with the interest of verifying the brake fluid level on a Mercedes Classe Cls. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is as a result necessary to check the brake fluid level of your Mercedes Classe Cls frequently (every 10,000km for example). It is also wise to flush the system every 50,000km because over time the brake fluid will lose its properties. This operation is specially simple and does not require evolved experience of mechanics, so it is easy for all Mercedes Classe Cls owners to do it on their own. If the Brake light on the dashboard of your Mercedes Classe Cls does not match to a lack of brake fluid, do not hesitate to browse our content page for details. Nevertheless, there are some measures and rules to respect that we will check out in the next part of this content page.

How to fill up the brake fluid of a Mercedes Classe Cls

So now we will explain to you how to do the brake fluid level on a Mercedes Classe Cls. Please note that this is very basic to perform. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this data in the user manual of your Mercedes Classe Cls. Now here are the steps to adhere to to make your level:

  • Open your cover and identify your brake fluid reservoir, it is very easy to locate, it is generally made of whitish/transparent plastic, it is located over the master cylinder (metal part) and has a yellow cap.
  • Once discovered, read the instructions on the cap cautiously so as not to make any mistakes during the operation, we advise you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercedes Classe Cls up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Mercedes Classe Cls, make sure you check the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Mercedes Classe Cls.

If you wish more guides on the Mercedes Classe Cls, go to our Mercedes Classe Cls category.