Among the small maintenance acts that you should do on a regular basis on your car, to fill up the brake fluid level of your Mercedes Benz CLS Class is one of the most classics. Even though this action is basic to complete, some of you are likely questioning why to do the brake fluid level on your car? And others are wondering how to do the brake fluid level on your Mercedes Benz CLS Class? We will now answer these questions.

check-brake-fluid-level-mercedes-benz-cls-class

Benefit to always have the brake fluid level up in your Mercedes Benz CLS Class

So we commence our article content with the significance of verifying the brake fluid level on a Mercedes Benz CLS Class. This fluid has an important role on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that as time passes you may lose brake fluid in the normal way (without any leakage). It is therefore important to verify the brake fluid level of your Mercedes Benz CLS Class often (every 10,000km for example). It is also wise to flush the system every 50,000km because with time the brake fluid loses its properties. This procedure is specially simple and does not require evolved expertise of mechanics, so it is easy for all Mercedes Benz CLS Class owners to do it themselves. If the Brake light on the dashboard of your Mercedes Benz CLS Class does not correspond to a lack of brake fluid, do not be reluctant to read our article content for details. On the other hand, there are some precautions and rules to follow that we will discover in the following section of this article content.

How to fill up the brake fluid of a Mercedes Benz CLS Class

So now we will explain to you how to do the brake fluid level on a Mercedes Benz CLS Class. Please be aware that this is very simple to carry out. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will find this data in the user manual of your Mercedes Benz CLS Class. Now here are the steps to follow to make your level:

  • Open your hood and find your brake fluid reservoir, it is very easy to situate, it is in most cases made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, read the instructions on the cap carefully so as not to make any problems during the procedure, we suggest you to clean the cap and the tank before opening. You will now be able to look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is good enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Mercedes Benz CLS Class up to the mark “Max”.
  • If the level was under the “Min” mark before you inspected the brake fluid level in your Mercedes Benz CLS Class, be sure to verify the level in a few days/weeks to make sure you don’t have a leak in the brake system

.
That’s it, you now have all the data you need to properly fill the brake fluid level of your Mercedes Benz CLS Class.

In the event that you have any additional questions about the Mercedes Benz CLS Class, do not hesitate to consult our Mercedes Benz CLS Class category.