Among the small routine service works that you should do on a consistent basis on your car, to fill up the brake fluid level of your Mazda CX 3 is one of the most classics. Even though this act is very easy to accomplish, some of you are most probably trying to figure out why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Mazda CX 3? We will now answer these questions.

check-brake-fluid-level-mazda-cx-3

Advantage to always have the brake fluid level up in your Mazda CX 3

So we start our content page with the benefit of looking at the brake fluid level on a Mazda CX 3. This fluid has a major function on your car, transmit the braking power to the wheels and thus stop your vehicle. Nevertheless, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is therefore necessary to check the brake fluid level of your Mazda CX 3 frequently (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid will lose its characteristics. This operation is really simple and does not require amazing knowledge of mechanics, so it is easy for all Mazda CX 3 owners to do it on their own. If the Brake light on the dashboard of your Mazda CX 3 does not correspond to a lack of brake fluid, do not hesitate to seek advice from our content page for details. Nevertheless, there are some safety measures and rules to follow that we will see in the next section of this content page.

How to fill up the brake fluid of a Mazda CX 3

So now we will describe to you how to do the brake fluid level on a Mazda CX 3. Please note that this is very elementary to complete. Nevertheless, you will have to check which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most cars use either DOT 3 or DOT 4. You will get this info in the user manual of your Mazda CX 3. Now here are the steps to adhere to to make your level:

  • Open your bonnet and identify your brake fluid reservoir, it is very easy to identify, it is in most cases made of whitish/transparent plastic, it is placed on top of the master cylinder (metal part) and has a yellow cap.
  • Once uncovered, browse the instructions on the cap mindfully so as not to make any problems during the operation, we suggest you to clean the cap and the tank before opening. You will now be able to check out the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Mazda CX 3 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you inspected the brake fluid level in your Mazda CX 3, make sure you check the level in a few days/weeks to be sure you don’t have a leak in the brake system

.
That’s it, you now have all the information you need to securely fill the brake fluid level of your Mazda CX 3.

If you need more guides on the Mazda CX 3, go to our Mazda CX 3 category.