Among the small maintenance acts that you should do regularly on your car, to fill up the brake fluid level of your hyundai i40 is one of the most classics. Even though this process is basic to do, some of you are probably concerned about why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your hyundai i40? We will now answer these questions.
Advantage to always have the brake fluid level up in your hyundai i40
So we start our content page with the benefit of checking the brake fluid level on a hyundai i40. This fluid has a crucial function on your car, transmit the braking power to the wheels and thus stop your automobile. Nevertheless, it is possible that after a while you may lose brake fluid in the normal way (without any leakage). It is therefore imperative to verify the brake fluid level of your hyundai i40 on a regular basis (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid loses its attributes. This procedure is really simple and does not require advanced experience of mechanics, so it is easy for all hyundai i40 owners to do it on their own. If the Brake light on the dashboard of your hyundai i40 does not match to a lack of brake fluid, do not hesitate to seek advice from our content page for details. Nevertheless, there are some precautions and rules to respect that we will see in the following part of this content page.
How to fill up the brake fluid of a hyundai i40
So now we will show to you how to do the brake fluid level on a hyundai i40. Please notice that this is very simple to accomplish. Nevertheless, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your hyundai i40. Now here are the steps to adhere to to make your level:
- Open your hood and find your brake fluid reservoir, it is very easy to identify, it is in general made of whitish/transparent plastic, it is located on top of the master cylinder (metal part) and has a yellow cap.
- Once established, browse the instructions on the cap attentively so as not to make any problems during the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and check out the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your hyundai i40 up to the mark “Max”.
- If the level was under the “Min” mark before you checked the brake fluid level in your hyundai i40, be sure to verify the level in a few days/weeks to be sure you don’t have a leak in the brake system
.
That’s it, you now have all the info you need to properly fill the brake fluid level of your hyundai i40.
To get more tips on the hyundai i40, take a look at the hyundai i40 category.
