Among the small service works that you should do regularly on your car, to fill up the brake fluid level of your Ford S-max is one of the most classics. Although this act is elementary to carry out, some of you are most likely wanting to know why to do the brake fluid level on your car? And others are questioning how to do the brake fluid level on your Ford S-max? We will now answer these questions.
Benefit to always have the brake fluid level up in your Ford S-max
So we start our article content with the significance of looking at the brake fluid level on a Ford S-max. This fluid has a fundamental role on your car, transmit the braking power to the wheels and thus stop your car. Nevertheless, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is consequently imperative to examine the brake fluid level of your Ford S-max on a regular basis (every 10,000km for example). It is also advisable to flush the system every 50,000km because with time the brake fluid loses its properties. This procedure is specially simple and does not require advanced expertise of mechanics, so it is easy for all Ford S-max owners to do it themselves. If the Brake light on the dashboard of your Ford S-max does not match to a lack of brake fluid, do not think twice to read our article content for details. Nevertheless, there are some measures and rules to follow that we will see in the following section of this article content.
How to fill up the brake fluid of a Ford S-max
So now we will learn to you how to do the brake fluid level on a Ford S-max. Please notice that this is very elementary to do. Nevertheless, you will have to examine which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this information in the user manual of your Ford S-max. Now here are the steps to follow to make your level:
- Open your bonnet and find your brake fluid reservoir, it is very easy to situate, it is in general made of whitish/transparent plastic, it is set on top of the master cylinder (metal part) and has a yellow cap.
- Once found, read the instructions on the cap carefully so as not to make any problems within the the procedure, we recommend you to clean the cap and the tank before opening. You will now be able to examine the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
- If the level is enough do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Ford S-max up to the mark “Max”.
- If the level was under the “Min” mark before you examined the brake fluid level in your Ford S-max, make sure you examine the level in a few days/weeks to ensure you don’t have a leak in the brake system
.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Ford S-max.
To discover more tips on the Ford S-max, take a look at the Ford S-max category.
