Among the small service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Ford C-max 2 is one of the most classics. Nevertheless this action is very easy to carry out, some of you are likely attempting to find why to do the brake fluid level on your car? And others are worried about how to do the brake fluid level on your Ford C-max 2? We will now answer these questions.

check-brake-fluid-level-ford-c-max-2

Benefit to always have the brake fluid level up in your Ford C-max 2

So we start our guideline with the significance of looking at the brake fluid level on a Ford C-max 2. This fluid has a fundamental function on your car, transmit the braking power to the wheels and thus stop your automobile. On the other hand, it is possible that over time you may lose brake fluid without any particular leak (without any leakage). It is as a result necessary to verify the brake fluid level of your Ford C-max 2 often (every 10,000km for example). It is also beneficial to flush the system every 50,000km because after some time the brake fluid loses its characteristics. This operation is really simple and does not require advanced expertise of mechanics, so it is easy for all Ford C-max 2 owners to do it themselves. If the Brake light on the dashboard of your Ford C-max 2 does not match to a lack of brake fluid, do not hesitate to read our guideline for details. On the other hand, there are some precautions and rules to respect that we will notice in the up coming part of this guideline.

How to fill up the brake fluid of a Ford C-max 2

So now we will show to you how to do the brake fluid level on a Ford C-max 2. Please take note that this is very simple to accomplish. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most vehicles use either DOT 3 or DOT 4. You will find this data in the user manual of your Ford C-max 2. Now here are the steps to adhere to to make your level:

  • Open your bonnet and locate your brake fluid reservoir, it is very easy to situate, it is usually made of whitish/transparent plastic, it is based above the master cylinder (metal part) and has a yellow cap.
  • Once established, examine the instructions on the cap cautiously so as not to make any mistakes within the the operation, we encourage you to clean the cap and the tank before opening. You will now be able to take a look at the side of the tank and observe the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid suitable for your Ford C-max 2 up to the mark “Max”.
  • If the level was beneath the “Min” mark before you examined the brake fluid level in your Ford C-max 2, make sure you verify the level in a few days/weeks to ensure you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Ford C-max 2.

To find more tips on the Ford C-max 2, take a look at the Ford C-max 2 category.