Among the small routine service works that you should do on a regular basis on your car, to fill up the brake fluid level of your Dodge Charger is one of the most classics. Nevertheless this work is very easy to carry out, some of you are likely concerned about why to do the brake fluid level on your car? And others are concerned about how to do the brake fluid level on your Dodge Charger? We will now answer these questions.

check-brake-fluid-level-dodge-charger

Benefit to always have the brake fluid level up in your Dodge Charger

So we begin our article with the interest of looking at the brake fluid level on a Dodge Charger. This fluid has a crucial function on your car, transmit the braking power to the wheels and thus stop your car. On the other hand, it is possible that in the long run you may lose brake fluid without any particular leak (without any leakage). It is consequently important to verify the brake fluid level of your Dodge Charger often (every 10,000km for example). It is also advisable to flush the system every 50,000km because as time passes the brake fluid loses its properties. This operation is particularly simple and does not require evolved experience of mechanics, so it is easy for all Dodge Charger owners to do it themselves. If the Brake light on the dashboard of your Dodge Charger does not correspond to a lack of brake fluid, do not be reluctant to have a look at our article for details. On the other hand, there are some measures and rules to respect that we will notice in the following section of this article.

How to fill up the brake fluid of a Dodge Charger

So now we will show to you how to do the brake fluid level on a Dodge Charger. Please note that this is very elementary to accomplish. On the other hand, you will have to verify which brake fluid is the right one for you between DOT 3, DOT 4 and DOT 5. Most automobiles use either DOT 3 or DOT 4. You will obtain this information in the user manual of your Dodge Charger. Now here are the steps to adhere to to make your level:

  • Open your cover and find your brake fluid reservoir, it is very easy to find, it is in most cases made of whitish/transparent plastic, it is based above the master cylinder (metal part) and has a yellow cap.
  • Once identified, examine the instructions on the cap cautiously so as not to make any problems during the operation, we recommend you to clean the cap and the tank before opening. You will now be able to have a look at the side of the tank and see the “Min” and “Max” marks on the side of the tank, which give you the range in which the level should be.
  • If the level is sufficient do not touch anything, or if you are close to or below the low mark, open the cap and fill it gently with the brake fluid appropriate for your Dodge Charger up to the mark “Max”.
  • If the level was under the “Min” mark before you examined the brake fluid level in your Dodge Charger, be sure to verify the level in a few days/weeks to make certain you don’t have a leak in the brake system

.
That’s it, you now have all the info you need to safely fill the brake fluid level of your Dodge Charger.

If you wish more guides on the Dodge Charger, go to our Dodge Charger category.