No matter it’s for your own security, for roadworthiness testing or for your budget, making sure your headlight bulbs are always operational is necessary. In fact, bulbs are wearing parts that will unavoidably burn out over time and as a result need to be replaced. You’re likely here because one of your headlights is burnt out and you’re wanting to know how to change the bulb of the fog lights on your skoda yeti, we’ve written this article content to help you do this procedure without help and not need to go to your mechanic. First of all, we will look at chaging the front fog light bulb of your skoda yeti and secondly, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my skoda yeti?
We are gonna commence this article content with the swapping the front fog light bulb of your skoda yeti, bear in mind that determined by the year and the finish of your car it may not be the same method to utilise, that’s why we are going to give you the two most traditional techniques to change the front fog light bulb of your car.
Change the front fog light bulb of your skoda yeti without removing the bumper.
First option, we will swap the bulb without taking out the bumper of your car. Although this solution is the least difficult, there is no assurance that you can perform it on your car. In fact, dependant upon the options and the year, on some models there will not be enough room for you to change the bulb using this method. Here are the two different solutions to change the front fog lamp bulb of your skoda yeti:
- By going under the bumper of your skoda yeti: First technique, you will put yourself under your car, don’t be reluctant to raise it with a jack if you don’t have enough room under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that protects your engine motor and that rests on your bumper, you will have access to the fog light block of your skoda yeti and you will not have any more (if you have enough space) remove the plastic cover, disconnect the plug, press on the metal part to take out the bulb and at last change the front fog light bulb of your skoda yeti
- By removing the wheel arch: Second alternative, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To achieve this, jack your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and carry out the same procedure as detailed earlier to change the bulb of the fog light of your skoda yeti.
How to change the front fog light bulb of your skoda yeti by removing the bumper?
We will at this point check out the circumstance where you are obliged by lack of room on your car model to remove the bumper of your skoda yeti to be able to access the front fog light bulb of your car. To accomplish this, you will first have to remove the front bumper of your skoda yeti, do not hesitate to browse our complete guideline to know the exact procedure, know to summarize, that you will need torx wrench, and that you will have to remove screws under your bonnet, in your wheel arches and under your car. Once the bumper has been taken away, you will only need to access the front fog lamp block and change the fog lamp bulb on your skoda yeti in the same procedure as stated earlier.
How to change the rear fog light bulb on your skoda yeti?
To finish, if you want to change the rear fog bulb of your car the method is much simpler, here are the different steps to follow to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your skoda yeti.
- After finding the rear fog light bulb on your car, remove the burnt-out bulb
- Insert your new rear fog light bulb into the headlamp block of your skoda yeti
- Put everything back in place
Verify that your fog lights are working correctly again before you hit the road and you’re done.
If you need more guides on the skoda yeti, go to our skoda yeti category.
.
