Whether it’s for your personal safety, for roadworthiness tests or for your budget, ensuring your headlight bulbs are actually functional is really important. In fact, bulbs are wearing parts that will unavoidably burn out over time and therefore need to be changed. You’re almost certainly in this article because one of your headlights is burnt out and you’re concerned about how to change the bulb of the fog lights on your seat altea, we’ve made this content page to help you do this process by yourself and not need to go to your auto technician. To start with ,, we will look at chaging the front fog light bulb of your seat altea and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my seat altea?
We are gonna begin this content page with the changing the front fog light bulb of your seat altea, take note that dependent on the year and the finish of your car it may not be the exact process to employ, that’s why we are going to give you the two most traditional solutions to change the front fog light bulb of your car.
Change the front fog light bulb of your seat altea without removing the bumper.
First solution, we will change the bulb without dismantling the bumper of your car. Although this approach is the least difficult, there is no guarantee that you can carry it out on your vehicle. In fact, in accordance with the options and the year, on some models there will not be enough room for you to change the bulb in this way. Here are the two different methods to change the front fog lamp bulb of your seat altea:
- By going under the bumper of your seat altea: First technique, you will position yourself under your vehicle, don’t hesitate to raise it with a jack if you don’t have enough room under the bumper. Once under the vehicle, all you have to do is to remove the clips of the plastic shoe that protects your engine and that rests on your bumper, you will have access to the fog light block of your seat altea and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and at last change the front fog light bulb of your seat altea
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To make this happen, lift your vehicle up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and accomplish the same process as mentioned earlier to change the bulb of the fog light of your seat altea.
How to change the front fog light bulb of your seat altea by removing the bumper?
We will at this point look at the circumstance where you are obliged by lack of room on your car model to remove the bumper of your seat altea in order to access the front fog light bulb of your car. To do so, you will first of all have to remove the front bumper of your seat altea, do not think twice to read our complete article to know the exact process, know to summarize, that you will need torx wrench, and that you will have to remove screws under your cover, in your wheel arches and under your vehicle. Once the bumper has been taken off, you will only need to access the front fog lamp block and replace the fog lamp bulb on your seat altea in the same procedure as described earlier.
How to change the rear fog light bulb on your seat altea?
At last, if you wish to change the rear fog bulb of your car the process is much simpler, here are the different steps to stick to to allow you to replace this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your seat altea.
- After finding the rear fog light bulb on your car, remove the burnt-out bulb
- Put in your new rear fog light bulb into the headlamp block of your seat altea
- Put everything back again
Verify that your fog lights are working correctly again before you hit the road and you’re done.
If you want more guides on the seat altea, go to our seat altea category.
.
