Regardless it’s for your own safety, for roadworthiness assessment or for your wallet, ensuring your headlight bulbs are all the time working is fundamental. Actually, bulbs are wearing auto parts that will obviously burn out in the long run and therefore need to be replaced. You’re almost certainly on this website because one of your headlights is burnt out and you’re wondering how to change the bulb of the fog lights on your BMW X3, we’ve made this content page to help you do this procedure on your own and not need to go to your repair shop. To begin with ,, we will look at chaging the front fog light bulb of your BMW X3 and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my BMW X3?
We are going to start this content page with the replacing the front fog light bulb of your BMW X3, be aware that dependant upon the year and the finish of your car it may not be the same process to utilise, that’s why we are going to give you the two most common strategies to replace the front fog light bulb of your vehicle.
Change the front fog light bulb of your BMW X3 without removing the bumper.
First solution, we will swap the bulb without removing the bumper of your car. Even though this strategy is the easiest, there is no guarantee that you can perform it on your car. Actually, determined by the options and the year, on some models there will not be enough space for you to change the bulb in this way. Here are the two different methods to change the front fog lamp bulb of your BMW X3:
- By going under the bumper of your BMW X3: First technique, you will position yourself under your car, don’t hesitate to raise it with a jack if you don’t have enough space under the bumper. Once under the car, all you have to do is to remove the clips of the plastic shoe that covers your engine unit and that rests on your bumper, you will have access to the fog light block of your BMW X3 and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and at last swap the front fog light bulb of your BMW X3
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To make this happen, jack your car up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and accomplish the same procedure as explained earlier to change the bulb of the fog light of your BMW X3.
How to change the front fog light bulb of your BMW X3 by removing the bumper?
We will at this point take a look at the circumstance where you are obliged by lack of space on your car model to remove the bumper of your BMW X3 in order to access the front fog light bulb of your car. To achieve this, you will first have to remove the front bumper of your BMW X3, do not hesitate to consult our complete article to know the exact process, know to summarize, that you will need torx wrench, and that you will have to remove screws under your bonnet, in your wheel arches and under your car. Once the bumper has been taken away, you will only need to access the front fog lamp block and change the fog lamp bulb on your BMW X3 in the same way as mentioned earlier.
How to change the rear fog light bulb on your BMW X3?
Finally, if you wish to change the rear fog bulb of your car the process is much simpler, here are the different steps to follow to allow you to change this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your BMW X3.
- After discovering the rear fog light bulb on your car, remove the burnt-out bulb
- Insert your new rear fog light bulb into the headlamp block of your BMW X3
- Put everything back in place
Check that your fog lights are working properly again before you hit the road and you’re done.
If you want more tutorials on the BMW X3, go to our BMW X3 category.
.
