Whether it’s for your personal safety, for roadworthiness assessment or for your budget, being certain your headlight bulbs are constantly operational is extremely important. The truth is, bulbs are wearing parts that will obviously burn out over time and consequently need to be changed. You’re most likely on this website because one of your headlights is burnt out and you’re wanting to know how to change the bulb of the fog lights on your Audi Rs4, we’ve posted this article content to help you do this operation on your own and not need to go to your mechanic. To start with ,, we will look at chaging the front fog light bulb of your Audi Rs4 and subsequently, how to change the rear fog light bulb on your car.
How to change the front fog light bulb of my Audi Rs4?
We are gonna begin this article content with the swapping the front fog light bulb of your Audi Rs4, remember that dependent on the year and the finish of your car it may not be the same technique to use, that’s why we are going to give you the two most traditional strategies to change the front fog light bulb of your car.
Change the front fog light bulb of your Audi Rs4 without removing the bumper.
First option, we will replace the bulb without taking out the bumper of your car. Although this process is the easiest, there is no assurance that you can perform it on your vehicle. The truth is, in accordance with the options and the year, on some models there will not be enough room for you to change the bulb in this manner. Here are the two different methods to change the front fog lamp bulb of your Audi Rs4:
- By passing under the bumper of your Audi Rs4: First technique, you will put yourself under your vehicle, don’t hesitate to raise it with a jack if you don’t have enough room under the bumper. Once under the vehicle, all you have to do is to remove the clips of the plastic shoe that protects your engine unit and that rests on your bumper, you will have access to the fog light block of your Audi Rs4 and you will not have any more (if you have enough space) remove the plastic cover, detach the plug, press on the metal part to take out the bulb and at last swap the front fog light bulb of your Audi Rs4
- By removing the wheel arch: Second option, you can remove the wheel arch of your car to have access to the fog lamp block of your car. To do this, lift your vehicle up, remove the front wheels, then remove your wheel arch using the clips provided for this purpose and conduct the same operation as explained earlier to change the bulb of the fog light of your Audi Rs4.
How to change the front fog light bulb of your Audi Rs4 by removing the bumper?
We will at this point look at the case where you are obliged by lack of room on your car model to remove the bumper of your Audi Rs4 to be able to gain access to the front fog light bulb of your car. To do so, you will first have to remove the front bumper of your Audi Rs4, do not be reluctant to browse our complete article to know the exact technique, know to summarize, that you will need torx wrench, and that you will have to remove screws under your hood, in your wheel arches and under your vehicle. Once the bumper has been taken away, you will only need to access the front fog lamp block and replace the fog lamp bulb on your Audi Rs4 in the same manner as stated earlier.
How to change the rear fog light bulb on your Audi Rs4?
Finally, if you wish to change the rear fog bulb of your car the technique is much easier, here are the different steps to stick to to allow you to replace this bulb:
- By the trunk, remove the floor covering from your trunk.
- Unscrew the back cover of the headlight unit from your Audi Rs4.
- After discovering the rear fog light bulb on your car, remove the burnt-out bulb
- Place your new rear fog light bulb into the headlamp block of your Audi Rs4
- Put everything back in place
Check that your fog lights are working correctly again before you hit the road and you’re done.
Whenever you have any further questions about the Audi Rs4, do not hesitate to consult our Audi Rs4 category.
.
