No matter if it’s for your own security, for roadworthiness tests or to avoid a fine, ensuring that your turn signal bulbs are constantly functioning is fundamental. Obviously, bulbs are wearing parts that will obviously burn out in the long run and as a result need to be swapped out. You’re certainly on this website because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Volkswagen Polo 6, we’ve written and published this post to enable you do it by yourself without having to go to your mechanic. To begin , we will have a look at inspecting a burnt-out rear turn signal bulb on your Volkswagen Polo 6 and in a second step, how to replace the rear turn signal bulb on your Volkswagen Polo 6.
How do you know if the rear turn signal bulb on your Volkswagen Polo 6 is burnt-out or needs to be changed?
When you drive your car you don’t constantly have the occasion to check all the security features of your Volkswagen Polo 6. Obviously, you are quite often on the go and are likely to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a result crucial to take a little time to in some instances check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Volkswagen Polo 6, but you didn’t identify it. Here are the two simple techniques to check if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Volkswagen Polo 6, then alternately turn on your left and right rear turn signals and get out of the car to check that they are efficient.
- By paying attention to the sound of your turn signals. In actual fact, there is an audible warning on each car that alerts you of a rear turn signal bulb burnt out on your Volkswagen Polo 6, you will detect that the time between each “click” is much shorter, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam Volkswagen Polo 6 or your position lights on Volkswagen Polo 6, don’t be reluctant to browse our articles to help you to realize this replacing.
Replacing the rear turn signal bulb on my Volkswagen Polo 6
Now let’s go to the most important step of this content page, how to replace the rear turn signal bulb on Volkswagen Polo 6? You should be aware that this procedure is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Volkswagen Polo 6, see our specific guideline. However, here are the full description to stick to in order to accomplish this process correctly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Volkswagen Polo 6. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working in the right way
.
In the event that you have any further questions about the Volkswagen Polo 6, do not hesitate to consult our Volkswagen Polo 6 category.
