No matter if it’s for your own security, for roadworthiness tests or to prevent a fine, ensuring your turn signal bulbs are constantly functioning is imperative. Surely, bulbs are wearing parts that will inevitably burn out in the long run and therefore need to be swapped out. You’re almost certainly here because one of your rear turn signals is burnt out and you’re attempting to find how to change the bulb of a rear turn signal on you Volkswagen Atlas, we’ve put into writing this post to teach you do it on your own without having to go to your auto technician. To begin , we will have a look at examining a burnt-out rear turn signal bulb on your Volkswagen Atlas and in a second step, how to replace the rear turn signal bulb on your Volkswagen Atlas.
How to be sure if the rear turn signal bulb on your Volkswagen Atlas is burnt-out or needs to be replaced?
When you drive your automobile you don’t constantly have the occasion to examine all the security features of your Volkswagen Atlas. Surely, you are often in a rush and are likely to get into your automobile, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact essential to make the effort to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Volkswagen Atlas, but you didn’t notice it. Here are the two ordinary solutions to examine if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Volkswagen Atlas, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functioning.
- By paying attention to the sound of your turn signals. In truth, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Volkswagen Atlas, you will notice that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Volkswagen Atlas or your position lights on Volkswagen Atlas, don’t be reluctant to read our publications to help you to realize this replacing.
Changing the rear turn signal bulb on my Volkswagen Atlas
Now let’s go to the most important step of this article content, how to replace the rear turn signal bulb on Volkswagen Atlas? You should be aware that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Volkswagen Atlas, see our dedicated content. However, here are the detailed description to carry out to be able to carry out this work properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Volkswagen Atlas. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning effectively
.
Whenever you have any further questions about the Volkswagen Atlas, do not hesitate to consult our Volkswagen Atlas category.
