Whether for your own security, for roadworthiness testing or to prevent a fine, being sure your turn signal bulbs are constantly working is necessary. Indeed, bulbs are wearing parts that will obviously burn out after a while and therefore need to be swapped out. You’re most likely on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Toyota Land Cruiser Serie 70, we’ve written this post to enable you do it alone without having to go to your auto mechanic. In a first step, we will have a look at examining a burnt-out rear turn signal bulb on your Toyota Land Cruiser Serie 70 and in a second step, how to change the rear turn signal bulb on your Toyota Land Cruiser Serie 70.
How to find out if the rear turn signal bulb on your Toyota Land Cruiser Serie 70 is burnt-out or needs to be replaced?
When you drive your vehicle you don’t constantly have the possibility to check all the security features of your Toyota Land Cruiser Serie 70. Indeed, you are often on the go and are likely to get into your vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is due to this fact important to take a little time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Toyota Land Cruiser Serie 70, but you didn’t detect it. Here are the two ordinary ways to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Toyota Land Cruiser Serie 70, then alternately turn on your left and right rear turn signals and get out of the car to check that they are working.
- By paying attention to the sound of your turn signals. In fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Toyota Land Cruiser Serie 70, you will recognize that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to change, like the one of your low beam Toyota Land Cruiser Serie 70 or your position lights on Toyota Land Cruiser Serie 70, don’t hesitate to consult our publications to help you to complete this substitution.
Replacing the rear turn signal bulb on my Toyota Land Cruiser Serie 70
Now let’s go to the most instersting step of this guideline, how to change the rear turn signal bulb on Toyota Land Cruiser Serie 70? You should be aware that this method is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Toyota Land Cruiser Serie 70, see our dedicated article content. However, here are the full description to follow in order to complete this work properly:
- To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Toyota Land Cruiser Serie 70. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is working properly
.
If you have any additional questions about the Toyota Land Cruiser Serie 70, do not hesitate to consult our Toyota Land Cruiser Serie 70 category.
