Whether for your own safety, for roadworthiness evaluation or to avoid a fine, being sure your turn signal bulbs are always functional is imperative. In fact, bulbs are wearing parts that will obviously burn out in the long run and as a result need to be replaced. You’re probably here because one of your rear turn signals is burnt out and you’re thinking about how to change the bulb of a rear turn signal on you Suzuki Jimny, we’ve written and published this post to enable you do it without any help without having to go to your mechanic. In a first step, we will take a look at inspecting a burnt-out rear turn signal bulb on your Suzuki Jimny and in a second step, how to change the rear turn signal bulb on your Suzuki Jimny.
How do you know if the rear turn signal bulb on your Suzuki Jimny is burnt-out or needs to be replaced?
When you drive your car you don’t always have the opportunity to verify all the safety features of your Suzuki Jimny. In fact, you are often times in a rush and are likely to get into your car, make your journey and put it down right away without taking the time to do an occasional check-up. It is due to this fact crucial to take a little time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Suzuki Jimny, but you didn’t become aware of it. Here are the two simple solutions to verify if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Suzuki Jimny, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are functioning.
- By paying attention to the sound of your turn signals. In truth, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Suzuki Jimny, you will realize that the time between each “click” is much shorter, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Suzuki Jimny or your position lights on Suzuki Jimny, don’t be reluctant to browse our content articles to help you to complete this replacement.
Replacing the rear turn signal bulb on my Suzuki Jimny
Now let’s go to the most important step of this content page, how to change the rear turn signal bulb on Suzuki Jimny? Take note that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Suzuki Jimny, see our specific article content. Nevertheless, here are the detailed steps to follow in order to do this work properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Suzuki Jimny. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning in the right way
.
If you wish more tutorials on the Suzuki Jimny, go to our Suzuki Jimny category.
