Whether for your personal safety, for roadworthiness tests or to prevent a fine, ensuring your turn signal bulbs are constantly functional is critical. In reality, bulbs are wearing devices that will inevitably burn out with time and as a result need to be swapped out. You’re certainly here because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Renault Twingo 3, we’ve written this article to enable you do it without any help without having to go to your motor mechanic. In a first step, we will have a look at inspecting a burnt-out rear turn signal bulb on your Renault Twingo 3 and in a second part, how to replace the rear turn signal bulb on your Renault Twingo 3.
How to find out if the rear turn signal bulb on your Renault Twingo 3 is burnt-out or needs to be changed?
When you drive your vehicle you don’t constantly have the occasion to examine all the safety features of your Renault Twingo 3. In reality, you are often times in a hurry and are likely to get into your vehicle, make your trip and put it down right away without taking the time to do an occasional check-up. It is due to this fact crucial to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Renault Twingo 3, but you didn’t detect it. Here are the two basic ways to examine if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Renault Twingo 3, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
- By listening to the sound of your turn signals. Indeed, there is an audible warning on each car that alerts you of a rear turn signal bulb burnt out on your Renault Twingo 3, you will notice that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam Renault Twingo 3 or your position lights on Renault Twingo 3, don’t hesitate to browse our publications to help you to do this replacing.
Changing the rear turn signal bulb on my Renault Twingo 3
Now let’s go to the most important part of this content page, how to replace the rear turn signal bulb on Renault Twingo 3? You should be aware that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Renault Twingo 3, see our specific article. On the other hand, here are the detailed steps to carry out in order to execute this act properly:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Change the rear turn signal bulb on your Renault Twingo 3. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is operating effectively
.
If you want more tutorials on the Renault Twingo 3, go to our Renault Twingo 3 category.
