No matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, being certain your turn signal bulbs are always functioning is imperative. In truth, bulbs are wearing auto parts that will obviously burn out in the long run and therefore need to be swapped out. You’re most likely on this website because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Peugeot Traveller, we’ve made this post to help you do it without any help without having to go to your motor mechanic. In a first step, we will look at inspecting a burnt-out rear turn signal bulb on your Peugeot Traveller and in a second part, how to replace the rear turn signal bulb on your Peugeot Traveller.
How to be sure if the rear turn signal bulb on your Peugeot Traveller is burnt-out or needs to be changed?
When you drive your car you don’t always have the opportunity to verify all the security features of your Peugeot Traveller. In truth, you are generally on the go and are likely to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is therefore essential to take the time to in some instances verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot Traveller, but you didn’t perceive it. Here are the two basic solutions to verify if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Peugeot Traveller, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are working.
- By listening to the sound of your turn signals. Indeed, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Peugeot Traveller, you will recognize that the time between each “click” is much shorter, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first technique shown above.
You may have another bulb to replace, like the one of your low beam Peugeot Traveller or your position lights on Peugeot Traveller, don’t be reluctant to consult our articles to help you to achieve this replacing.
Replacing the rear turn signal bulb on my Peugeot Traveller
Now let’s go to the most important part of this article, how to replace the rear turn signal bulb on Peugeot Traveller? Take note that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot Traveller, see our dedicated content. Nevertheless, here are the full description to adhere to in order to conduct this act properly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Peugeot Traveller. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is functioning properly
.
In the event that you have any additional questions about the Peugeot Traveller, do not hesitate to consult our Peugeot Traveller category.
