Whether for your personal safety, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are always functioning is extremely important. In fact, bulbs are wearing devices that will inevitably burn out over time and therefore need to be swapped out. You’re most certainly here because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Peugeot 4007, we’ve written this post to teach you do it by yourself without having to go to your auto technician. To begin , we will examine examining a burnt-out rear turn signal bulb on your Peugeot 4007 and in a second part, how to change the rear turn signal bulb on your Peugeot 4007.
How to be sure if the rear turn signal bulb on your Peugeot 4007 is burnt-out or needs to be changed?
When you drive your vehicle you don’t always have the possibility to check all the safety features of your Peugeot 4007. In fact, you are generally on the go and are likely to get into your vehicle, make your trip and put it down right away without taking the time to do an occasional check-up. It is therefore fundamental to take a little time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Peugeot 4007, but you didn’t become aware of it. Here are the two basic ways to check if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Peugeot 4007, then alternately turn on your left and right rear turn signals and get out of the car to check that they are functioning.
- By listening to the sound of your turn signals. In fact, there is an audible signal on each car that informs you of a rear turn signal bulb burnt out on your Peugeot 4007, you will detect that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Peugeot 4007 or your position lights on Peugeot 4007, don’t hesitate to read our content articles to help you to realize this substitution.
Changing the rear turn signal bulb on my Peugeot 4007
Now let’s go to the most instersting part of this article content, how to change the rear turn signal bulb on Peugeot 4007? Take note that this method is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Peugeot 4007, see our dedicated guideline. However, here are the detailed steps to stick to in order to perform this process correctly:
- To access the tail light set up, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Peugeot 4007. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, check your new turn signal bulb is operating correctly
.
To discover more tips on the Peugeot 4007, take a look at the Peugeot 4007 category.
