Whether for your personal safety, for roadworthiness testing or to prevent a fine, ensuring your turn signal bulbs are all the time working is imperative. Indeed, bulbs are wearing devices that will inevitably burn out after a while and as a result need to be swapped out. You’re most certainly on this page because one of your rear turn signals is burnt out and you’re wanting to know how to change the bulb of a rear turn signal on you Jeep Liberty, we’ve written and published this content to help you do it all on your own without having to go to your motor mechanic. To begin , we will have a look at inspecting a burnt-out rear turn signal bulb on your Jeep Liberty and in a second step, how to replace the rear turn signal bulb on your Jeep Liberty.
How to be sure if the rear turn signal bulb on your Jeep Liberty is burnt-out or needs to be changed?
When you drive your car you don’t all the time have the opportunity to examine all the safety features of your Jeep Liberty. Indeed, you are quite often on the go and tend to get into your car, make your journey and put it down instantly without taking the time to do an occasional check-up. It is as a result crucial to take a little time to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jeep Liberty, but you didn’t detect it. Here are the two basic techniques to examine if a rear turn signal on your car is out of order or if you need to replace it fairly quickly:
- When you stop, turn on the ignition on your Jeep Liberty, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functional.
- By listening to the sound of your turn signals. In actual fact, there is an audible indicator on each car that informs you of a rear turn signal bulb burnt out on your Jeep Liberty, you will perceive that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Jeep Liberty or your position lights on Jeep Liberty, don’t hesitate to read our web content to help you to complete this substitution.
Changing the rear turn signal bulb on my Jeep Liberty
Now let’s go to the most important step of this article, how to replace the rear turn signal bulb on Jeep Liberty? Please note that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jeep Liberty, see our specific article. However, here are the full description to follow to be able to accomplish this work properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Replace the rear turn signal bulb on your Jeep Liberty. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning correctly
.
If you have any further questions about the Jeep Liberty, do not hesitate to consult our Jeep Liberty category.
