Whether for your personal safety, for roadworthiness tests or to prevent a fine, being sure your turn signal bulbs are all the time functioning is extremely important. In actual fact, bulbs are wearing auto parts that will predictably burn out over time and consequently need to be replaced. You’re probably on this page because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Dodge Challenger, we’ve made this article to enable you do it on your own without having to go to your motor mechanic. To begin , we will examine examining a burnt-out rear turn signal bulb on your Dodge Challenger and in a second part, how to change the rear turn signal bulb on your Dodge Challenger.
How do you know if the rear turn signal bulb on your Dodge Challenger is burnt-out or needs to be replaced?
When you drive your automobile you don’t all the time have the occasion to examine all the safety features of your Dodge Challenger. In actual fact, you are often times on the go and are likely to get into your automobile, make your trip and put it down straight away without taking the time to do an occasional check-up. It is due to this fact fundamental to spend some time to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Dodge Challenger, but you didn’t detect it. Here are the two simple techniques to examine if a rear turn signal on your car is out of order or if you need to change it fairly quickly:
- When you stop, turn on the ignition on your Dodge Challenger, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functional.
- By paying attention to the sound of your turn signals. In fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Dodge Challenger, you will perceive that the time between each “click” is much closer, this involves that you will have to change the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Dodge Challenger or your position lights on Dodge Challenger, don’t hesitate to read our web content to help you to achieve this replacing.
Changing the rear turn signal bulb on my Dodge Challenger
Now let’s go to the most important part of this content page, how to change the rear turn signal bulb on Dodge Challenger? Please be aware that this procedure is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Dodge Challenger, see our specific article. However, here are the full description to adhere to to be able to do this work accurately:
- To access the tail light set up, take out the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously recognized by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Dodge Challenger. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning effectively
.
To find more tips on the Dodge Challenger, take a look at the Dodge Challenger category.
