No matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, making sure your turn signal bulbs are always functioning is critical. In truth, bulbs are wearing parts that will surely burn out as time passes and as a result need to be replaced. You’re most certainly on this page because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Lexus IS, we’ve put into writing this post to enable you do it on your own without having to go to your technician. In a first step, we will have a look at examining a burnt-out rear turn signal bulb on your Lexus IS and in a second part, how to replace the rear turn signal bulb on your Lexus IS.
How do you know if the rear turn signal bulb on your Lexus IS is burnt-out or needs to be replaced?
When you drive your vehicle you don’t always have the opportunity to examine all the safety features of your Lexus IS. In truth, you are often times in a hurry and tend to get into your vehicle, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a result fundamental to take a little time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Lexus IS, but you didn’t perceive it. Here are the two basic methods to examine if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Lexus IS, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functional.
- By listening to the sound of your turn signals. In truth, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Lexus IS, you will recognize that the time between each “click” is much shorter, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to replace, like the one of your low beam Lexus IS or your position lights on Lexus IS, don’t be reluctant to browse our publications to help you to complete this replacing.
Replacing the rear turn signal bulb on my Lexus IS
Now let’s go to the most instersting part of this content, how to replace the rear turn signal bulb on Lexus IS? You should be aware that this operation is very simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Lexus IS, see our specific guideline. On the other hand, here are the detailed steps to stick to in order to carry out this work accurately:
- To access the tail light set up, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take out the rear indicator bulb from your burnt-out turn signal that you have sooner identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Lexus IS. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning in the right way
.
In the event that you have any further questions about the Lexus IS, do not hesitate to consult our Lexus IS category.
