No matter if it’s for your personal safety, for roadworthiness tests or to avoid a fine, being certain your turn signal bulbs are always functioning is fundamental. Obviously, bulbs are wearing devices that will obviously burn out in the long run and therefore need to be replaced. You’re most likely here because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Citroen Jumpy, we’ve created this post to enable you do it by yourself without having to go to your mechanic. To begin , we will check out the checking a burnt-out rear turn signal bulb on your Citroen Jumpy and in a second step, how to replace the rear turn signal bulb on your Citroen Jumpy.
How to find out if the rear turn signal bulb on your Citroen Jumpy is burnt-out or needs to be replaced?
When you drive your car you don’t always have the occasion to verify all the safety features of your Citroen Jumpy. Obviously, you are often times on the go and tend to get into your car, make your journey and put it down immediately without taking the time to do an occasional check-up. It is therefore necessary to take some time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Citroen Jumpy, but you didn’t notice it. Here are the two ordinary methods to verify if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:
- When you stop, turn on the ignition on your Citroen Jumpy, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are working.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that alerts you of a rear turn signal bulb burnt out on your Citroen Jumpy, you will perceive that the time between each “click” is much closer, this suggests that that you will have to replace the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to replace, like the one of your low beam Citroen Jumpy or your position lights on Citroen Jumpy, don’t hesitate to have a look at our articles to help you to realize this replacing.
Changing the rear turn signal bulb on my Citroen Jumpy
Now let’s go to the most important step of this content page, how to replace the rear turn signal bulb on Citroen Jumpy? Please note that this technique is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Citroen Jumpy, see our specific content page. On the other hand, here are the detailed description to follow to be able to do this act correctly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise direction
- Replace the rear turn signal bulb on your Citroen Jumpy. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working properly
.
If you wish more guides on the Citroen Jumpy, go to our Citroen Jumpy category.
