Whether for your personal safety, for roadworthiness testing or to prevent a fine, being certain your turn signal bulbs are always working is critical. In fact, bulbs are wearing parts that will predictably burn out in the long run and consequently need to be replaced. You’re most likely here because one of your rear turn signals is burnt out and you’re questioning how to change the bulb of a rear turn signal on you Citroen C-crosser, we’ve written and published this content to enable you do it on your own without having to go to your auto mechanic. To begin , we will have a look at inspecting a burnt-out rear turn signal bulb on your Citroen C-crosser and in a second part, how to change the rear turn signal bulb on your Citroen C-crosser.
How to find out if the rear turn signal bulb on your Citroen C-crosser is burnt-out or needs to be replaced?
When you drive your car you don’t always have the opportunity to verify all the safety features of your Citroen C-crosser. In fact, you are often on the go and are likely to get into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a result essential to spend some time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Citroen C-crosser, but you didn’t perceive it. Here are the two ordinary solutions to verify if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Citroen C-crosser, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By paying attention to the sound of your turn signals. Indeed, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Citroen C-crosser, you will notice that the time between each “click” is much shorter, this suggests that that you will have to change the rear turn signal bulb or before. It’s up to you to examine and validate which one is burnt out by a visual check as on the first strategy shown above.
You may have another bulb to change, like the one of your low beam Citroen C-crosser or your position lights on Citroen C-crosser, don’t hesitate to consult our articles to help you to achieve this replacement.
Replacing the rear turn signal bulb on my Citroen C-crosser
Now let’s go to the most important part of this article content, how to change the rear turn signal bulb on Citroen C-crosser? You should be aware that this procedure is quite simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Citroen C-crosser, see our specific guideline. Nevertheless, here are the full description to follow to be able to carry out this act properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Remove the rear indicator bulb from your burnt-out turn signal that you have sooner diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Citroen C-crosser. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is working effectively
.
To discover more tips on the Citroen C-crosser, take a look at the Citroen C-crosser category.
