Whether it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always operational is pretty important. Indeed, bulbs are wearing parts that will undoubtedly burn out after some time and as a result need to be replaced. You’re most likely here because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Skoda Enyaq parking light, we’ve written this content page to help you do this process without hiring somebody and not need to go to your motor mechanic. In a first step, we will look at replacing the front daytime running light bulb of your motor vehicle and in a second step, how to change the rear daytime running light.

change-parking-light-skoda-enyaq

How to change the front parking light bulb of my Skoda Enyaq?

We will begin this document with exchanging the front daytime running light bulb of your Skoda Enyaq, take notice that depending on the year and finish of your motor vehicle it may not be quite the same solution to use. Indeed, regardless if the location of your bulb is not going to change, the access may be more or less complicated depending on the features of your car.

First solution, we will perform the bulb change of your daytime running light without removing the headlight of your Skoda Enyaq. Although this method is the easiest, it is not guaranteed that you will be able to execute it on your automobile without encumbrance. Indeed, dependant on the versions and the year, on some versions there will not be enough space for you to change the bulb like this. Here are the two different solutions to change the bulb of the front parking light of your Skoda Enyaq:.

  • Going through the bonnet of your car: First technique, you will only go through the bonnet of your automobile to direct access your headlight unit. This is the most rational solution but it is not always easy to do to realise, often because of secondary parts that will obstruct your access. To do this, here are the guidelines to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been completed, you will need to access the back of your headlight unit to change the daytime running light bulb on your Skoda Enyaq. You may need to remove the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to remove the bulb socket from its location. To do this, pull delicately on the socket and not on the wires (you risk damaging them), finally once the socket is out, you can change your parking lamps bulb, being cautious not to damage the wires and use a cloth to avoid dirtying your new bulb. Once carried out, reassemble the system, reconnect your battery and do a check test before taking to the road.
  • By removing the crosshair grill and the headlight:
  • Second alternative, you can remove the headlight of your Skoda Enyaq in the event that the access through the engine block seems too challenging. To do so, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these steps are completed you will just have to stick to the same technique as on the previous part to change the front daytime running light bulb of your Skoda Enyaq

.

How to change the rear parking light bulb on your Skoda Enyaq

Finally, if you need to change the rear parking light bulb of your Skoda Enyaq the technique is much simpler, here are the different steps to stick to to allow you to change this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Place your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are functioning correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Skoda Enyaq, please go through our specific document to learn how to do it.

Whenever you have any further questions about the Skoda Enyaq, do not hesitate to consult our Skoda Enyaq category.