It doesn’t matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring your headlamp bulbs are constantly functional is extremely important. In fact, bulbs are wearing parts that will definitely burn out over time and as a result need to be swapped out. You’re most likely on this website because one of your position lamp is burnt out and you’re concerned about how to change the bulb of my seat cordoba parking light, we’ve posted this content page to help you do this procedure by yourself and not need to go to your mechanic. In a first part, we will look into replacing the front daytime running light bulb of your car and in a second step, how to replace the rear daytime running light.

change-parking-light-seat-cordoba

How to replace the front parking light bulb of my seat cordoba?

We will commence this article with swapping the front daytime running light bulb of your seat cordoba, take note that depending on the year and finish of your car it may not be quite the same solution to use. In fact, regardless if the position of your bulb is not going to change, the access may be more or less difficult depending on the features of your car.

First solution, we will conduct the bulb change of your daytime running light without taking out the headlight of your seat cordoba. Although this approach is the most simple, it is not assured that you will be in a position to accomplish it on your motor vehicle without trouble. In fact, depending on the versions and the year, on some models there will not be enough space for you to replace the bulb like this. Here are the two different ways to replace the bulb of the front parking light of your seat cordoba:.

  • Going through the bonnet of your car: First strategy, you will only go through the bonnet of your motor vehicle to access your headlight unit. This is the most wise solution but it is not always easy to achieve, generally because of secondary auto parts that will obstruct your access. To achieve this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been completed, you will need to access the back of your headlight unit to replace the daytime running light bulb on your seat cordoba. You may need to take off the battery for easier access. In this case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to take off the bulb socket from its position. To achieve this, pull carefully on the socket and not on the wires (you risk damaging them), at last once the socket is out, you can replace your parking lamps bulb, being vigilant not to damage the wires and use a cloth to avoid dirtying your new bulb. Once finished, reassemble the set up, reconnect your battery and perform a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second solution, you can remove the headlight of your seat cordoba in the event that the access through the engine block seems too difficult. To accomplish this, you just have to open your bonnet, take off the front grill held by only a few torx screws, then take off the headlight in question. Once these actions are finished you will just have to stick to the same method as on the previous section to replace the front daytime running light bulb of your seat cordoba

.

How to replace the rear parking light bulb on your seat cordoba

To conclude, if you desire to change the rear parking light bulb of your seat cordoba the technique is less difficult, here are the different actions to stick to to allow you to change this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Place your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Verify that your parking lights are working correctly again before you set off again and you’re done. If you want to change the fog light bulb on your seat cordoba, please read our dedicated content page to find out how to do it.

If you need more tutorials on the seat cordoba, go to our seat cordoba category.