Regardless whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are constantly working is important and vital. In fact, bulbs are wearing parts that will inevitably burn out with time and consequently need to be replaced. You’re most likely here because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Peugeot 1007 parking light, we’ve made this article content to help you do this operation on your own and not need to go to your repair shop. In a first step, we will take a look at changing the front daytime running light bulb of your motor vehicle and in a second section, how to swap the rear daytime running light.

change-parking-light-peugeot-1007

How to swap the front parking light bulb of my Peugeot 1007?

We will begin this document with changing the front daytime running light bulb of your Peugeot 1007, take notice that according to the year and finish of your motor vehicle it may not be quite the same method to use. In fact, regardless if the location of your bulb is not going to change, the access may be more or less complicated based on the features of your car.

First method, we will accomplish the bulb change of your daytime running light without getting rid of the headlight of your Peugeot 1007. Although this approach is the most simple, it is not guaranteed that you will be in a position to do it on your car without trouble. In fact, based on the options and the year, on some versions there will not be enough space for you to swap the bulb by doing this. Here are the two different techniques to swap the bulb of the front parking light of your Peugeot 1007:.

  • Going through the bonnet of your car: First approach, you will only go through the bonnet of your car to direct access your headlight unit. This is the most logical method but it is not always easy to do to realise, often because of secondary auto parts that will block your access. To perform this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Once this stage has been done, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Peugeot 1007. You may possibly need to remove the battery for easier access. In this instance, you will need to open the bulb protection cap on your headlight (¼ in most cases does the job), then you will need to remove the bulb socket from its location. To perform this, pull delicately on the socket and not on the wires (you risk damaging them), finally once the socket is out, you can swap your parking lamps bulb, being careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once done, reassemble the assembly, reconnect your battery and do a check test before taking to the road.
  • By getting rid of the crosshair grill and the headlight:
  • Second option, you can remove the headlight of your Peugeot 1007 if it turns out the access through the engine block seems too complicated. To do so, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these steps are achieved you will simply have to stick to the same methodology as on the previous section to swap the front daytime running light bulb of your Peugeot 1007

.

How to swap the rear parking light bulb on your Peugeot 1007

To conclude, if you wish to swap the rear parking light bulb of your Peugeot 1007 the process is much simpler, here are the different steps to stick to to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After finding the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Insert your brand-new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Check that your parking lights are operating correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Peugeot 1007, please browse our dedicated article to learn how to do it.

To discover more tips on the Peugeot 1007, take a look at the Peugeot 1007 category.