Regardless whether it’s for your personal safety, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are always working is very important. In reality, bulbs are wearing parts that will surely burn out over time and as a consequence need to be changed. You’re most likely on this website because one of your position lamp is burnt out and you’re wondering how to change the bulb of my Mitsubishi Lancer parking light, we’ve posted this article content to help you do this operation on your own and not need to go to your motor mechanic. In a first part, we will take a look at replacing the front daytime running light bulb of your car and in a second step, how to replace the rear daytime running light.
How to replace the front parking light bulb of my Mitsubishi Lancer?
We will start this article content with exchanging the front daytime running light bulb of your Mitsubishi Lancer, take note that depending on the year and finish of your car it may not be quite the same solution to use. In reality, regardless if the location of your bulb is not going to change, the access may be more or less complicated depending on the features of your car.
First solution, we will execute the bulb swap of your daytime running light without getting rid of the headlight of your Mitsubishi Lancer. Although this method is the easiest, it is not assured that you will be in a position to do it on your motor vehicle without encumbrance. In reality, depending on the options and the year, on some versions there will not be enough space for you to replace the bulb by doing this. Here are the two distinct techniques to replace the bulb of the front parking light of your Mitsubishi Lancer:.
- Going through the bonnet of your car: First strategy, you will only go through the bonnet of your motor vehicle to direct access your headlight unit. This is the most rational solution but it is not always easy to do to accomplish, generally because of secondary parts that will block your access. To perform this, here are the guidelines to follow. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this stage has been accomplished, you will need to access the back of your headlight unit to replace the daytime running light bulb on your Mitsubishi Lancer. You may perhaps need to remove the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ generally does the job), then you will need to remove the bulb socket from its area. To perform this, pull gently on the socket and not on the wires (you risk damaging them), at last when the socket is out, you can replace your parking lamps bulb, being very careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once carried out, reassemble the assembly, reconnect your battery and execute a check test before taking to the road.
- By getting rid of the crosshair grill and the headlight:
- Second option, you can remove the headlight of your Mitsubishi Lancer if it turns out the access through the engine block seems too complicated. To do so, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these actions are achieved you will simply have to follow the same method as on the previous part to replace the front daytime running light bulb of your Mitsubishi Lancer
.
How to replace the rear parking light bulb on your Mitsubishi Lancer
To finish , if you desire to change the rear parking light bulb of your Mitsubishi Lancer the process is less difficult, here are the different basic steps to follow to allow you to change this bulb:
- Disconnect your battery
- Get the floorboards out of the trunk.
- Unscrew the back cover of the headlight unit from your car.
- After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
- Insert your new parking light bulb into the headlamp assembly on your car
- Reassemble the whole thing.
Check that your parking lights are working correctly again before you set off again and you’re done. If you want to change the fog light bulb on your Mitsubishi Lancer, please browse our specific document to learn how to do it.
To discover more tips on the Mitsubishi Lancer, take a look at the Mitsubishi Lancer category.
