Regardless of it’s for your own security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are constantly working is extremely important. In fact, bulbs are wearing parts that will undoubtedly burn out as time passes and therefore need to be changed. You’re most likely here because one of your position lamp is burnt out and you’re thinking about how to change the bulb of my Chevrolet Bolt parking light, we’ve posted this article to help you do this operation without help and not need to go to your mechanic. In a first part, we will look into changing the front daytime running light bulb of your motor vehicle and in a second step, how to swap the rear daytime running light.

change-parking-light-chevrolet-bolt

How to swap the front parking light bulb of my Chevrolet Bolt?

We will commence this article content with replacing the front daytime running light bulb of your Chevrolet Bolt, remember that based on the year and finish of your motor vehicle it may not be quite the same method to use. In fact, whether or not the location of your bulb is not going to change, the access may be more or less challenging depending on the features of your car.

First method, we will accomplish the bulb swap of your daytime running light without taking out the headlight of your Chevrolet Bolt. Although this technique is the easiest, it is not assured that you will be able to execute it on your vehicle without trouble. In fact, dependant on the versions and the year, on some versions there will not be enough space for you to swap the bulb by doing this. Here are the two distinct methods to swap the bulb of the front parking light of your Chevrolet Bolt:.

  • Going through the bonnet of your car: First strategy, you will only go through the bonnet of your vehicle to direct access your headlight unit. This is the most wise process but it is not always easy to realise, sometimes because of secondary auto parts that will obstruct your access. To accomplish this, here are the basic steps to carry out. First, with the engine off, disconnect the terminals of your battery to avoid any short circuit or risk of electrocution. Now that this step has been completed, you will need to access the back of your headlight unit to swap the daytime running light bulb on your Chevrolet Bolt. You might need to remove the battery for easier access. In such a case, you will need to open the bulb protection cap on your headlight (¼ usually does the job), then you will need to remove the bulb socket from its area. To accomplish this, pull gently on the socket and not on the wires (you risk damaging them), finally when the socket is out, you can swap your parking lamps bulb, being very careful not to damage the wires and use a cloth to avoid dirtying your new bulb. Once carried out, reassemble the system, reconnect your battery and carry out a check test before taking to the road.
  • By taking out the crosshair grill and the headlight:
  • Second alternative, you can remove the headlight of your Chevrolet Bolt if it turns out the access through the engine block seems too complicated. To do so, you just have to open your bonnet, remove the front grill held by only a few torx screws, then remove the headlight in question. Once these steps are achieved you will only have to follow the same technique as on the previous part to swap the front daytime running light bulb of your Chevrolet Bolt

.

How to swap the rear parking light bulb on your Chevrolet Bolt

Finally, if you wish to swap the rear parking light bulb of your Chevrolet Bolt the method is incredibly easier, here are the different steps to follow to allow you to swap this bulb:

  • Disconnect your battery
  • Get the floorboards out of the trunk.
  • Unscrew the back cover of the headlight unit from your car.
  • After locating the rear position lamps bulb on your car, remove the burnt-out bulb.
  • Put in your new parking light bulb into the headlamp assembly on your car
  • Reassemble the whole thing.

Examine that your parking lights are functioning properly again before you set off again and you’re done. If you want to change the fog light bulb on your Chevrolet Bolt, please browse our dedicated content to learn how to do it.

If you wish more tutorials on the Chevrolet Bolt, go to our Chevrolet Bolt category.