Whether it’s for your specific security, for roadworthiness tests or to avoid a fine, being sure your headlamp bulbs are always functional is necessary. In fact, bulbs are wearing units that will predictably burn out after some time and as a result need to be swapped out. You’re perhaps on the website because one of your parking lights is burnt out and you’re wondering how to change your Renault Clio 4’s license plate bulb, we’ve written this article to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Clio 4.
How to change the license plate bulb on your Renault Clio 4 through the outside
This solution is the least difficult of the two, in fact, for this one you will only have to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will spend a moment on in the second part of this content to explain the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Renault Clio 4. Whether it’s the front or the back of your automobile the process will be identical.
Here are a few simple steps to stick to to conduct this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Clio 4
- Use your screwdriver or knife to eject the bulb from its placement, in the event that you are afraid of damaging a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the achievement of the procedure.
.
How to change the number plate bulb on your Renault Clio 4 without outside access
Second part of our article, replace this license plate bulb on your Renault Clio 4 without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Renault Clio 4
To change the one on the front plate, nothing could be simpler, you will have to position yourself under the automobile (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much pressure otherwise you will break the plastic cover), and you will just have to take away the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Renault Clio 4
Finally last possibility, you must change the bulb on the backplate of your Renault Clio 4, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the tactic to perform this task:
- Disconnect the battery from your Renault Clio 4
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Renault Clio 4, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for replacing license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to do it following the outline of this content page. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Renault Clio 4. If you wish to change other bulbs like the position light bulbs on your Renault Clio 4 or the low beam bulbs on Renault Clio 4, don’t be reluctant to consult our content articles which describe you the operation to follow.
To find more tips on the Renault Clio 4, take a look at the Renault Clio 4 category.
