Regardless it’s for your own security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always functional is necessary. Indeed, bulbs are wearing auto parts that will undoubtedly burn out after a while and therefore need to be swapped out. You’re most certainly on the website because one of your parking lights is burnt out and you’re questioning how to change your Mazda CX 9’s license plate bulb, we’ve made this content to help you do it by yourself and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Mazda CX 9.
How to replace the license plate bulb on your Mazda CX 9 throughout the outside
This technique is the quickest of the two, in fact, for this one you will only need to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will take a moment on in the second part of this document to clarify the approach.
So let’s start with changing the number plate bulb by going through the outside of your Mazda CX 9. Regardless it’s the front or the back of your automobile the method will be similar.
Here are a few simple steps to follow to execute this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mazda CX 9
- Use your screwdriver or knife to eject the bulb from its spot, if you are worried of destroying something, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the operation.
.
How to replace the number plate bulb on your Mazda CX 9 without outside access
Second part of our article, swap this license plate bulb on your Mazda CX 9 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Mazda CX 9
To replace the one on the front plate, nothing could be less hard, you will have to position yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Mazda CX 9
Finally last possibility, you must replace the bulb on the backplate of your Mazda CX 9, but you cannot really open the cover from the outside of your automobile. In this case, here is the solution to execute this task:
- Disconnect the battery from your Mazda CX 9
- Locate the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mazda CX 9, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for changing license plate bulbs on your car, remember that on some models the method may be a bit different but you should be able to accomplish it following the outline of this content page. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Mazda CX 9. If you desire to change other bulbs like the position light bulbs on your Mazda CX 9 or the low beam bulbs on Mazda CX 9, don’t hesitate to read our content articles which explain you the process to follow.
To get more tips on the Mazda CX 9, take a look at the Mazda CX 9 category.
