Whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly operational is necessary. In reality, bulbs are wearing auto parts that will surely burn out with time and as a result need to be changed. You’re most certainly in this article because one of your parking lights is burnt out and you’re worried about how to change your Dacia Sandero 2’s license plate bulb, we’ve created this content to help you do it all on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Dacia Sandero 2.
How to change the license plate bulb on your Dacia Sandero 2 throughout the outside
This tactic is the most simple of the two, in fact, for this one you will just have to take away the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will take some time on in the second part of this content page to teach you the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Dacia Sandero 2. Whether it’s the front or the back of your automobile the method will be similar.
Here are a few simple actions to stick to to conduct this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dacia Sandero 2
- Use your screwdriver or knife to eject the bulb from its location, if you are worried of damaging something, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to validate the achievement of the procedure.
.
How to change the number plate bulb on your Dacia Sandero 2 without outside access
Second part of our item, change this license plate bulb on your Dacia Sandero 2 without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Dacia Sandero 2
To change the one on the front plate, nothing could be less complicated, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally kept by two soft plastic tabs by pressing on both at the same time, then once you have your license plate bulb block in hand, Remove the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much force otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Dacia Sandero 2
Finally last possibility, you must change the bulb on the backplate of your Dacia Sandero 2, but you are not able to open the cover from the outside of your automobile. In such a case, here is the solution to execute this operation:
- Unplug the battery from your Dacia Sandero 2
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Dacia Sandero 2, check it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main techniques for changing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to do it following the explanation of this article. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Dacia Sandero 2. If you desire to change other bulbs like the position light bulbs on your Dacia Sandero 2 or the low beam bulbs on Dacia Sandero 2, don’t be reluctant to read our articles which describe you the procedure to follow.
Whenever you have any additional questions about the Dacia Sandero 2, do not hesitate to consult our Dacia Sandero 2 category.
