It doesn’t matter if it’s for your own personal security, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are always effective is necessary. Indeed, bulbs are wearing parts that will predictably burn out with time and therefore need to be swapped out. You’re almost certainly on this site because one of your parking lights is burnt out and you’re questioning how to change your Dacia Logan’s license plate bulb, we’ve made this content page to help you do it without any help and not have to go to your motor mechanic. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Dacia Logan.

change-license-plate-bulb-dacia-logan

How to swap the license plate bulb on your Dacia Logan through the outside

This tactic is the most simple of the two, actually, for this one you will only require to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate a moment on in the second section of this content to teach you the method.
So let’s start with changing the number plate bulb by going through the outside of your Dacia Logan. It doesn’t matter if it’s the front or the back of your car the process will be the same.
Here are a few simple actions to follow to perform this service:

  • With the engine turned off, disconnect the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to place the flat part into the notch specified for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dacia Logan
  • .

  • Use your screwdriver or knife to remove the bulb from its placement, in the event you are afraid of breaking a thing, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.

How to change the number plate bulb on your Dacia Logan without outside access

Second section of our content page, change this license plate bulb on your Dacia Logan without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).

How to swap the front license plate bulb on my Dacia Logan

To swap the one on the front plate, nothing could be easier, you will have to position yourself under the car (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take away the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much pressure otherwise you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.

How to swap the rear license plate bulb on my Dacia Logan

Finally last solution, you must swap the bulb on the backplate of your Dacia Logan, but you are not able to open the cover from the outside of your car. In such a case, here is the process to accomplish this task:

  • Unplug the battery from your Dacia Logan
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, disconnect the holders for easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Dacia Logan, test it and reassemble it, watching the clips on the trunk liner

.
There you have it, you have learned the main solutions for changing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Dacia Logan. If you desire to change other bulbs like the position light bulbs on your Dacia Logan or the low beam bulbs on Dacia Logan, don’t be reluctant to browse our articles which describe you the operation to follow.

To get more tips on the Dacia Logan, take a look at the Dacia Logan category.