Regardless it’s for your own personal security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are in every case working is really important. In fact, bulbs are wearing auto parts that will surely burn out with time and consequently need to be replaced. You’re likely on this site because one of your parking lights is burnt out and you’re worried about how to change your Dacia Dokker’s license plate bulb, we’ve created this article content to help you do it on your own and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Dacia Dokker.
How to change the license plate bulb on your Dacia Dokker coming from the outside
This tactic is the least difficult of the two, in fact, for this one you will only require to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second part of this article to teach you the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Dacia Dokker. Regardless it’s the front or the back of your motor vehicle the operation will be identical.
Here are a few simple steps to stick to to execute this service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Dacia Dokker
- Use your screwdriver or knife to eject the bulb from its spot, in the event you are afraid of destroying something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and check the light to validate the success of the operation.
.
How to change the number plate bulb on your Dacia Dokker without outside access
Second part of our content page, replace this license plate bulb on your Dacia Dokker without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Dacia Dokker
To change the one on the front plate, nothing could be less hard, you will have to put yourself under the motor vehicle (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to apply too much force otherwise you will break the plastic cover), and you will just have to take off the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Dacia Dokker
Finally last solution, you must change the bulb on the backplate of your Dacia Dokker, but you simply cannot open the cover from the outside of your motor vehicle. In this instance, here is the process to perform this operation:
- Unplug the battery from your Dacia Dokker
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Dacia Dokker, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, take note that on some models the method may be a bit different but you should be able to accomplish it following the outline of this content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Dacia Dokker. If you wish to change other bulbs like the position light bulbs on your Dacia Dokker or the low beam bulbs on Dacia Dokker, don’t hesitate to read our content articles which describe you the operation to follow.
If you wish more tutorials on the Dacia Dokker, go to our Dacia Dokker category.
