It doesn’t matter if it’s for your specific security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are all the time functioning is really important. Indeed, bulbs are wearing auto parts that will surely burn out in the future and as a result need to be swapped out. You’re likely in this article because one of your parking lights is burnt out and you’re struggling with how to change your Citroen Xsara’s license plate bulb, we’ve written and published this content page to help you do it by yourself and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Citroen Xsara.

change-license-plate-bulb-citroen-xsara

How to change the license plate bulb on your Citroen Xsara throughout the outside

This solution is the most simple of the two, in truth, for this one you will just have to take off the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second section of this document to clarify the approach.
So let’s start with replacing the number plate bulb by going through the outside of your Citroen Xsara. It doesn’t matter if it’s the front or the back of your automobile the procedure will be similar.
Here are a few simple steps to follow to carry out this maintenance tasks:

  • With the engine turned off, unplug the battery terminals from your car
  • Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (in general on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Citroen Xsara
  • .

  • Use your screwdriver or knife to eject the bulb from its location, if you are afraid of breaking something, you can also do it with your fingers.
  • Finally, put the new license plate light bulb
  • Last step, before reassembling, reconnect your battery and verify the light to validate the achievement of the task.

How to replace the number plate bulb on your Citroen Xsara without outside access

Second section of our document, replace this license plate bulb on your Citroen Xsara without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Citroen Xsara

To change the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in general held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to apply too much pressure or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.

How to change the rear license plate bulb on my Citroen Xsara

Finally last option, you must change the bulb on the backplate of your Citroen Xsara, but you are not able to open the cover from the outside of your automobile. In this instance, here is the method to do this task:

  • Disconnect the battery from your Citroen Xsara
  • Identify the position of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Replace the burnt-out license plate bulb on your Citroen Xsara, verify it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have learned the main techniques for replacing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Citroen Xsara. If you wish to change other bulbs like the position light bulbs on your Citroen Xsara or the low beam bulbs on Citroen Xsara, don’t hesitate to read our content articles which describe you the operation to follow.

To discover more tips on the Citroen Xsara, take a look at the Citroen Xsara category.