It doesn’t matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are constantly operational is very important. Indeed, bulbs are wearing parts that will undoubtedly burn out after some time and as a result need to be changed. You’re quite likely in this article because one of your parking lights is burnt out and you’re wondering how to change your Acura ILX’s license plate bulb, we’ve created this article content to help you do it by yourself and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Acura ILX.
How to swap the license plate bulb on your Acura ILX through the outside
This technique is the fastest of the two, in truth, for this one you will simply need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this content page to explain the method.
So let’s begin with swapping the number plate bulb by going through the outside of your Acura ILX. It doesn’t matter if it’s the front or the back of your automobile the method will be similar.
Here are a few simple guidelines to stick to to conduct this service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Acura ILX
- Use your screwdriver or knife to remove the bulb from its spot, if you are worried of destroying a thing, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the achievement of the task.
.
How to change the number plate bulb on your Acura ILX without outside access
Second part of our article, swap this license plate bulb on your Acura ILX without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Acura ILX
To swap the one on the front plate, nothing could be less difficult, you will have to put yourself under the automobile (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take off the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much force or you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Acura ILX
Finally last option, you must swap the bulb on the backplate of your Acura ILX, but you cannot really open the cover from the outside of your automobile. In this instance, here is the method to execute this operation:
- Disconnect the battery from your Acura ILX
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Acura ILX, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main ways for swapping license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your garage area it would be a shame to break a part of your Acura ILX. If you desire to change other bulbs like the position light bulbs on your Acura ILX or the low beam bulbs on Acura ILX, don’t hesitate to browse our content articles which describe you the operation to follow.
If you have any further questions about the Acura ILX, do not hesitate to consult our Acura ILX category.
