It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always working is imperative. Indeed, bulbs are wearing parts that will undoubtedly burn out with time and therefore need to be replaced. You’re perhaps on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Subaru Outback, we’ve created this document to help you do it by yourself and not have to go to your mechanic. In a first section, we will have a look at controling a burnt-out front turn signal bulb on your Subaru Outback and in a second section, how to change the front turn signal bulb on your car..
How to discover if the front turn signal bulb on your Subaru Outback is burnt out or needs to be changed?
When you drive your motor vehicle you don’t always have the opportunity to examine all the safety components of your Subaru Outback. Indeed, you are in general in a rush and tend to enter into your motor vehicle, make your trip and put it down immediately without taking the time to do an regular check-up. It is as a result crucial to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Subaru Outback, but that you didn’t notice it. Here are the two simple methods to control if a front turn signal is burnt out or if you need to change it promptly:
- When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functioning.
- By hearing to the sound of your blinkers. Indeed, there is an audible indication on each car that signals you of a front turn indicator bulb burnt out on your Subaru Outback, you will identify that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to examine and check out which one is burnt out by a visual control as on the first process shown earlier mentioned.
You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to read our articles to help you to do this substitution.
Changing the front turn signal bulb on your Subaru Outback
Now let’s go to the most significant section of this document, how to change the front turn signal bulb of your Subaru Outback? You should be aware that this procedure is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Subaru Outback. If it is a bulb on your rear turn signal, see our specific document. Nevertheless, here are the details of the guidelines to follow to be able to accomplish this act properly depending on the solution you desire to choose.
Change front turn signal bulb on your Subaru Outback through the bonnet:
- Open your bonnet and clear access to your headlight pods.
- Use a torx tip to open the headlight unit on your car
- Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
- Replace the front flasher bulb of your Subaru Outback by the new one (be sure to examine if it’s an orange or transparent bulb).
- Reassemble and test that the new front turn signal bulb is effective.
- Lift your car, and take out the front wheel on the side you want to work on.
- Take out your wheel arch with a torx bit.
- Go to your headlamp block and change the front turn signal bulb on your car following the same guidelines as on the part previously seen.
- Put your Subaru Outback on a jack or a candle.
- Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be breakable.
- Take out your headlight block and change the front turn indicator bulb of your Subaru Outback following the steps seen in the parts seen earlier.
- Put the whole thing back together again.
Change the front turn signal bulb of your Subaru Outback through the wheel arch:
This tactic is particularly valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:
Replace the front turn signal bulb of your Subaru Outback through the bumper:
On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will point them now:
To find more tips on the Subaru Outback, take a look at the Subaru Outback category.