Regardless for your personal security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always working is imperative. Indeed, bulbs are wearing parts that will inevitably burn out after a while and therefore need to be swapped out. You’re almost certainly in this article because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Peugeot 307 Cc, we’ve made this content to help you do it by yourself and not have to go to your auto mechanic. In a first step, we will look at controling a burnt-out front turn signal bulb on your Peugeot 307 Cc and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-peugeot-307-cc

How to find out if the front turn signal bulb on your Peugeot 307 Cc is burnt out or needs to be replaced?

When you drive your automobile you don’t always have the opportunity to verify all the security features of your Peugeot 307 Cc. Indeed, you are nearly always in a rush and tend to get into your automobile, make your journey and put it down immediately without taking the time to do an regular check-up. It is consequently important to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Peugeot 307 Cc, but that you didn’t notice it. Here are the two simple solutions to examine if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By listening to the sound of your blinkers. Indeed, there is an audible indication on each car that informs you of a front turn indicator bulb burnt out on your Peugeot 307 Cc, you will recognise that the time between each “click” is much closer, this suggests that you will have to replace the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual examine as on the first methodology shown earlier mentioned.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t hesitate to browse our content articles to help you to achieve this replacement.

Replacing the front turn signal bulb on your Peugeot 307 Cc

Now let’s go to the most significant step of this content, how to change the front turn signal bulb of your Peugeot 307 Cc? Take note that this technique is very simple, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Peugeot 307 Cc. If it is a bulb on your rear turn signal, see our specific content. However, here are the details of the actions to follow in order to perform this action properly dependant on the approach you desire to adopt.

Change front turn signal bulb on your Peugeot 307 Cc through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Peugeot 307 Cc by the new one (make sure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.

    • Change the front turn signal bulb of your Peugeot 307 Cc through the wheel arch:

    This tactic is extremely practical when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Peugeot 307 Cc through the bumper:

    On some years or finishes, according to the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will describe them right now:

    • Put your Peugeot 307 Cc on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be fragile.
    • Remove your headlight block and swap the front turn indicator bulb of your Peugeot 307 Cc following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To get more tips on the Peugeot 307 Cc, take a look at the Peugeot 307 Cc category.