Regardless whether for your own safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always operational is important. In fact, bulbs are wearing parts that will surely burn out after awhile and as a consequence need to be swapped out. You’re quite likely on this site because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Nissan Pulsar, we’ve created this document to help you do it all on your own and not have to go to your auto technician. In a first section, we will examine the checking a burnt-out front turn signal bulb on your Nissan Pulsar and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-nissan-pulsar

How to discover if the front turn signal bulb on your Nissan Pulsar is burnt out or needs to be changed?

When you drive your car you don’t always have the possibility to examine all the safety components of your Nissan Pulsar. In fact, you are often in a hurry and tend to enter into your car, make your trip and put it down instantly without taking the time to do an occasional check-up. It is as a result relevant to take the time to occasionally examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Nissan Pulsar, but that you didn’t detect it. Here are the two simple methods to control if a front turn signal is burnt out or if you need to replace it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are working.
  • By listening to the sound of your blinkers. In fact, there is an audible indicator on each car that alerts you of a front turn indicator bulb burnt out on your Nissan Pulsar, you will notice that the time between each “click” is much shorter, this means that you will have to swap the front turn signal bulb or before. It’s up to you to examine and examine which one is burnt out by a visual control as on the first procedure shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our content articles to help you to perform this replacing.

Changing the front turn signal bulb on your Nissan Pulsar

Now let’s go to the most significant section of this document, how to change the front turn signal bulb of your Nissan Pulsar? Please be aware that this procedure is uncomplicated, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Nissan Pulsar. If it is a bulb on your rear turn signal, see our dedicated document. On the other hand, here are the details of the simple steps to follow to be able to carry out this act properly depending on the technique you want to choose.

Replace front turn signal bulb on your Nissan Pulsar through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Nissan Pulsar by the new one (make certain to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.

    • Replace the front turn signal bulb of your Nissan Pulsar through the wheel arch:

    This technique is extremely practical when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Nissan Pulsar through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will detail them right now:

    • Put your Nissan Pulsar on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be fragile.
    • Take away your headlight block and replace the front turn indicator bulb of your Nissan Pulsar following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you wish more tutorials on the Nissan Pulsar, go to our Nissan Pulsar category.