Whether for your own security, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always operational is very important. In fact, bulbs are wearing parts that will surely burn out after some time and as a consequence need to be replaced. You’re most certainly in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Lincoln MKC, we’ve created this article content to help you do it without help and not have to go to your technician. In a first section, we will have a look at controling a burnt-out front turn signal bulb on your Lincoln MKC and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-lincoln-mkc

How to recognise if the front turn signal bulb on your Lincoln MKC is burnt out or needs to be changed?

When you drive your vehicle you don’t constantly have the opportunity to examine all the security equipments of your Lincoln MKC. In fact, you are frequently in a rush and tend to enter into your vehicle, make your trip and put it down immediately without taking the time to do an periodic check-up. It is consequently relevant to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Lincoln MKC, but that you didn’t detect it. Here are the two simple options to check if a front turn signal is burnt out or if you need to swap it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are functional.
  • By hearing to the sound of your blinkers. In fact, there is an audible indication on each car that signals you of a front turn indicator bulb burnt out on your Lincoln MKC, you will recognise that the time between each “click” is much shorter, this denotes that you will have to swap the front turn signal bulb or before. It’s up to you to examine and make sure which one is burnt out by a visual check as on the first methodology shown previously.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to consult our content articles to help you to achieve this substitution.

Replacing the front turn signal bulb on your Lincoln MKC

Now let’s go to the most essential section of this article content, how to replace the front turn signal bulb of your Lincoln MKC? Take note that this process is quite easy, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Lincoln MKC. If it is a bulb on your rear turn signal, see our dedicated article content. On the other hand, here are the details of the actions to stick to in order to execute this act properly depending on the solution you wish to choose.

Replace front turn signal bulb on your Lincoln MKC through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Lincoln MKC by the new one (make certain to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb works.
  • Replace the front turn signal bulb of your Lincoln MKC through the wheel arch:

    This tactic is in particular effective when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Change the front turn signal bulb of your Lincoln MKC through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will explain them now:

    • Put your Lincoln MKC on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be breakable.
    • Take out your headlight block and swap the front turn indicator bulb of your Lincoln MKC following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    In the event that you have any further questions about the Lincoln MKC, do not hesitate to consult our Lincoln MKC category.