Regardless whether for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always functional is imperative. Indeed, bulbs are wearing parts that will inevitably burn out after awhile and as a result need to be replaced. You’re most likely on this website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your hyundai i40, we’ve written and published this article content to help you do it without help and not have to go to your auto technician. In a first step, we will look at controling a burnt-out front turn signal bulb on your hyundai i40 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-hyundai-i40

How to discover if the front turn signal bulb on your hyundai i40 is burnt out or needs to be changed?

When you drive your vehicle you don’t always have the possibility to check all the safety equipments of your hyundai i40. Indeed, you are in general in a rush and tend to get into your vehicle, make your trip and put it down right away without taking the time to do an periodic check-up. It is therefore important to take the time to occasionally check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your hyundai i40, but that you didn’t notice it. Here are the two simple methods to examine if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functioning.
  • By listening to the sound of your blinkers. Indeed, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your hyundai i40, you will recognize that the time between each “click” is much closer, this means that you will have to swap the front turn signal bulb or before. It’s up to you to check and check out which one is burnt out by a visual examine as on the first process shown previously.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to read our articles to help you to do this replacing.

Replacing the front turn signal bulb on your hyundai i40

Now let’s go to the most important step of this article content, how to change the front turn signal bulb of your hyundai i40? Please be aware that this process is quite easy, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your hyundai i40. If it is a bulb on your rear turn signal, see our dedicated article content. Nevertheless, here are the details of the guidelines to stick to to be able to execute this action accurately depending on the technique you wish to adopt.

Replace front turn signal bulb on your hyundai i40 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your hyundai i40 by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb works.
  • Replace the front turn signal bulb of your hyundai i40 through the wheel arch:

    This solution is especially valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your hyundai i40 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will explain them right now:

    • Put your hyundai i40 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be delicate.
    • Take off your headlight block and swap the front turn indicator bulb of your hyundai i40 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    If you want more guides on the hyundai i40, go to our hyundai i40 category.