Whether for your personal security, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always working is very important. Indeed, bulbs are wearing parts that will definitely burn out with time and as a consequence need to be swapped out. You’re most certainly here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Ford Puma, we’ve written and published this article to help you do it alone and not have to go to your repair shop. In a first part, we will examine controling a burnt-out front turn signal bulb on your Ford Puma and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-puma

How to discover if the front turn signal bulb on your Ford Puma is burnt out or needs to be changed?

When you drive your car you don’t constantly have the possibility to examine all the security components of your Ford Puma. Indeed, you are nearly always in a hurry and tend to enter into your car, make your journey and put it down right away without taking the time to do an regular check-up. It is as a result important to take the time to once in a while examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford Puma, but that you didn’t realize it. Here are the two simple methods to control if a front turn signal is burnt out or if you need to swap it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are functioning.
  • By listening to the sound of your blinkers. Indeed, there is an audible indicator on each car that warns you of a front turn indicator bulb burnt out on your Ford Puma, you will recognize that the time between each “click” is much closer, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual control as on the first methodology shown previously.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t hesitate to browse our articles to help you to complete this replacement.

Replacing the front turn signal bulb on your Ford Puma

Now let’s go to the most important part of this article, how to change the front turn signal bulb of your Ford Puma? You should be aware that this task is quite easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Ford Puma. If it is a bulb on your rear turn signal, see our dedicated article. Nevertheless, here are the details of the steps to follow to be able to conduct this act properly dependant on the technique you wish to adopt.

Change front turn signal bulb on your Ford Puma through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford Puma by the new one (make sure to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb functions.

    • Change the front turn signal bulb of your Ford Puma through the wheel arch:

    This solution is in particular effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same simple steps as on the part previously seen.

    Replace the front turn signal bulb of your Ford Puma through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them now:

    • Put your Ford Puma on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be breakable.
    • Take out your headlight block and swap the front turn indicator bulb of your Ford Puma following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you need more guides on the Ford Puma, go to our Ford Puma category.