Regardless whether for your own security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always operational is important. In fact, bulbs are wearing parts that will inevitably burn out over the years and as a result need to be changed. You’re most likely here because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Fiat Punto Evo, we’ve created this content page to help you do it on your own and not have to go to your technician. In a first section, we will have a look at the checking a burnt-out front turn signal bulb on your Fiat Punto Evo and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-fiat-punto-evo

How to recognize if the front turn signal bulb on your Fiat Punto Evo is burnt out or needs to be changed?

When you drive your motor vehicle you don’t always have the possibility to verify all the security components of your Fiat Punto Evo. In fact, you are mostly in a rush and tend to enter into your motor vehicle, make your trip and put it down immediately without taking the time to do an unexpected check-up. It is as a result important to take the time to sometimes verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Fiat Punto Evo, but that you didn’t become aware of it. Here are the two simple ways to control if a front turn signal is burnt out or if you need to swap it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are working.
  • By listening to the sound of your blinkers. In fact, there is an audible signal on each car that signals you of a front turn indicator bulb burnt out on your Fiat Punto Evo, you will perceive that the time between each “click” is much closer, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to verify and examine which one is burnt out by a visual control as on the first methodology shown earlier mentioned.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to read our content articles to help you to complete this replacement.

Replacing the front turn signal bulb on your Fiat Punto Evo

Now let’s go to the most significant section of this content page, how to replace the front turn signal bulb of your Fiat Punto Evo? Take note that this procedure is very simple, you will need to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Fiat Punto Evo. If it is a bulb on your rear turn signal, see our special content page. On the other hand, here are the details of the guidelines to stick to to be able to execute this act efficiently depending on the technique you want to adopt.

Replace front turn signal bulb on your Fiat Punto Evo through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Fiat Punto Evo by the new one (make sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb functions.

    • Replace the front turn signal bulb of your Fiat Punto Evo through the wheel arch:

    This tactic is specifically useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Fiat Punto Evo through the bumper:

    On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will detail them right now:

    • Put your Fiat Punto Evo on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be delicate.
    • Remove your headlight block and swap the front turn indicator bulb of your Fiat Punto Evo following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If you want more guides on the Fiat Punto Evo, go to our Fiat Punto Evo category.