Whether for your personal security, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always operational is extremely important. Indeed, bulbs are wearing parts that will undoubtedly burn out over time and as a consequence need to be swapped out. You’re quite likely here because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Fiat Doblo 2, we’ve created this article content to help you do it alone and independently and not have to go to your auto mechanic. In a first part, we will have a look at controling a burnt-out front turn signal bulb on your Fiat Doblo 2 and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-fiat-doblo-2

How to recognize if the front turn signal bulb on your Fiat Doblo 2 is burnt out or needs to be changed?

When you drive your car you don’t constantly have the possibility to verify all the security features of your Fiat Doblo 2. Indeed, you are most likely in a rush and tend to enter into your car, make your trip and put it down right away without taking the time to do an periodic check-up. It is as a consequence important to take the time to sometimes verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Fiat Doblo 2, but that you didn’t realize it. Here are the two simple options to examine if a front turn signal is burnt out or if you need to swap it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functional.
  • By listening to the sound of your blinkers. Indeed, there is an audible indicator on each car that informs you of a front turn indicator bulb burnt out on your Fiat Doblo 2, you will find out that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual examine as on the first solution shown above.

You may have another bulb to swap, like the one of your low beam or your position lights, don’t hesitate to browse our blog posts to help you to do this replacing.

Changing the front turn signal bulb on your Fiat Doblo 2

Now let’s go to the main part of this article content, how to change the front turn signal bulb of your Fiat Doblo 2? Please be aware that this task is very simple, you will need to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Fiat Doblo 2. If it is a bulb on your rear turn signal, see our dedicated article content. However, here are the details of the guidelines to follow to be able to carry out this action properly dependant on the solution you wish to choose.

Change front turn signal bulb on your Fiat Doblo 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Fiat Doblo 2 by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb works.

    • Change the front turn signal bulb of your Fiat Doblo 2 through the wheel arch:

    This approach is in particular useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Fiat Doblo 2 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will describe them now:

    • Put your Fiat Doblo 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be fragile.
    • Take away your headlight block and swap the front turn indicator bulb of your Fiat Doblo 2 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To get more tips on the Fiat Doblo 2, take a look at the Fiat Doblo 2 category.