Regardless for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always functioning is extremely important. Indeed, bulbs are wearing parts that will definitely burn out after awhile and as a consequence need to be swapped out. You’re probably here because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your BMW X6, we’ve written this article content to help you do it without help and not have to go to your mechanic. In a first step, we will take a look at the checking a burnt-out front turn signal bulb on your BMW X6 and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-bmw-x6

How to know if the front turn signal bulb on your BMW X6 is burnt out or needs to be swapped out?

When you drive your automobile you don’t constantly have the possibility to check all the safety equipments of your BMW X6. Indeed, you are frequently in a hurry and tend to enter into your automobile, make your journey and put it down immediately without taking the time to do an unexpected check-up. It is consequently important to take the time to sometimes check the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your BMW X6, but that you didn’t detect it. Here are the two simple techniques to verify if a front turn signal is burnt out or if you need to change it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functioning.
  • By listening to the sound of your blinkers. Indeed, there is an audible indicator on each car that warns you of a front turn indicator bulb burnt out on your BMW X6, you will notice that the time between each “click” is much closer, this suggests that you will have to change the front turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual verify as on the first solution shown above.

You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to browse our articles to help you to accomplish this replacing.

Replacing the front turn signal bulb on your BMW X6

Now let’s go to the most essential step of this article content, how to replace the front turn signal bulb of your BMW X6? You should be aware that this procedure is quite easy, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your BMW X6. If it is a bulb on your rear turn signal, see our specific article content. Nevertheless, here are the details of the guidelines to stick to in order to perform this action correctly dependant on the approach you wish to adopt.

Change front turn signal bulb on your BMW X6 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your BMW X6 by the new one (make certain to check if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb operates.

    • Change the front turn signal bulb of your BMW X6 through the wheel arch:

    This tactic is specifically valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take away the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your BMW X6 through the bumper:

    On some years or finishes, dependant on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will detail them now:

    • Put your BMW X6 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be delicate.
    • Remove your headlight block and change the front turn indicator bulb of your BMW X6 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you wish more tutorials on the BMW X6, go to our BMW X6 category.