It doesn’t matter if for your personal security, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always operational is important. Indeed, bulbs are wearing parts that will surely burn out over the years and therefore need to be replaced. You’re quite likely on the website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Bmw Serie 2, we’ve made this article to help you do it alone and not have to go to your auto mechanic. In a first section, we will take a look at controling a burnt-out front turn signal bulb on your Bmw Serie 2 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-bmw-serie-2

How to recognise if the front turn signal bulb on your Bmw Serie 2 is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t always have the possibility to check all the security components of your Bmw Serie 2. Indeed, you are in many cases in a hurry and tend to get into your motor vehicle, make your journey and put it down immediately without taking the time to do an regular check-up. It is as a result relevant to take the time to sometimes check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Bmw Serie 2, but that you didn’t notice it. Here are the two simple techniques to check if a front turn signal is burnt out or if you need to replace it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are functional.
  • By listening to the sound of your blinkers. Indeed, there is an audible sign on each car that informs you of a front turn indicator bulb burnt out on your Bmw Serie 2, you will notice that the time between each “click” is much shorter, this suggests that you will have to swap the front turn signal bulb or before. It’s up to you to check and check which one is burnt out by a visual check as on the first procedure shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to conduct this substitution.

Replacing the front turn signal bulb on your Bmw Serie 2

Now let’s go to the main section of this article, how to change the front turn signal bulb of your Bmw Serie 2? Take note that this technique is quite simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Bmw Serie 2. If it is a bulb on your rear turn signal, see our special article. Nevertheless, here are the details of the steps to stick to to be able to carry out this act correctly dependant on the technique you want to adopt.

Replace front turn signal bulb on your Bmw Serie 2 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Bmw Serie 2 by the new one (make sure to check if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb operates.

    • Replace the front turn signal bulb of your Bmw Serie 2 through the wheel arch:

    This approach is especially effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Bmw Serie 2 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will detail them right now:

    • Put your Bmw Serie 2 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be cautious with the plastic staples which can be vulnerable.
    • Take off your headlight block and replace the front turn indicator bulb of your Bmw Serie 2 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To discover more tips on the Bmw Serie 2, take a look at the Bmw Serie 2 category.