Regardless whether for your personal safety, for roadworthiness testing or to avoid a fine, ensuring that your turn signal bulbs are always operational is extremely important. Indeed, bulbs are wearing parts that will surely burn out after awhile and as a consequence need to be swapped out. You’re likely on the website because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Bmw Serie 2 F23, we’ve written this content to help you do it by yourself and not have to go to your technician. In a first section, we will have a look at controling a burnt-out front turn signal bulb on your Bmw Serie 2 F23 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-bmw-serie-2-f23

How to recognize if the front turn signal bulb on your Bmw Serie 2 F23 is burnt out or needs to be replaced?

When you drive your vehicle you don’t constantly have the opportunity to verify all the safety features of your Bmw Serie 2 F23. Indeed, you are in many cases in a rush and tend to get into your vehicle, make your trip and put it down instantly without taking the time to do an regular check-up. It is as a consequence important to take the time to once in a while verify the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Bmw Serie 2 F23, but that you didn’t detect it. Here are the two simple options to examine if a front turn signal is burnt out or if you need to change it promptly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are working.
  • By listening to the sound of your blinkers. Indeed, there is an audible signal on each car that alerts you of a front turn indicator bulb burnt out on your Bmw Serie 2 F23, you will recognise that the time between each “click” is much closer, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to verify and check out which one is burnt out by a visual examine as on the first technique shown earlier mentioned.

You may have an additional bulb to change, like the one of your low beam or your position lights, don’t hesitate to read our articles to help you to carry out this substitution.

Replacing the front turn signal bulb on your Bmw Serie 2 F23

Now let’s go to the most important section of this content, how to change the front turn signal bulb of your Bmw Serie 2 F23? Please note that this procedure is really easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Bmw Serie 2 F23. If it is a bulb on your rear turn signal, see our specific content. On the other hand, here are the details of the steps to stick to in order to perform this action properly depending on the approach you want to choose.

Replace front turn signal bulb on your Bmw Serie 2 F23 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Bmw Serie 2 F23 by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb functions.

    • Replace the front turn signal bulb of your Bmw Serie 2 F23 through the wheel arch:

    This procedure is in particular useful when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Bmw Serie 2 F23 through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will point them now:

    • Put your Bmw Serie 2 F23 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be delicate.
    • Take out your headlight block and change the front turn indicator bulb of your Bmw Serie 2 F23 following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To find more tips on the Bmw Serie 2 F23, take a look at the Bmw Serie 2 F23 category.