Whether for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always functional is imperative. In reality, bulbs are wearing parts that will surely burn out after some time and consequently need to be replaced. You’re probably on this site because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Bmw Serie 1 F20, we’ve made this content page to help you do it alone and independently and not have to go to your mechanic. In a first section, we will look at controling a burnt-out front turn signal bulb on your Bmw Serie 1 F20 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-bmw-serie-1-f20

How to know if the front turn signal bulb on your Bmw Serie 1 F20 is burnt out or needs to be replaced?

When you drive your automobile you don’t constantly have the opportunity to examine all the safety equipments of your Bmw Serie 1 F20. In reality, you are in general in a hurry and tend to get into your automobile, make your trip and put it down right away without taking the time to do an occasional check-up. It is as a consequence essential to take the time to sometimes examine the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Bmw Serie 1 F20, but that you didn’t become aware of it. Here are the two simple solutions to verify if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are operational.
  • By hearing to the sound of your blinkers. In reality, there is an audible indicator on each car that warns you of a front turn indicator bulb burnt out on your Bmw Serie 1 F20, you will recognize that the time between each “click” is much shorter, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to examine and check out which one is burnt out by a visual verify as on the first technique shown earlier mentioned.

You may have another bulb to change, like the one of your low beam or your position lights, don’t be reluctant to consult our articles to help you to perform this replacement.

Changing the front turn signal bulb on your Bmw Serie 1 F20

Now let’s go to the most significant section of this content page, how to change the front turn signal bulb of your Bmw Serie 1 F20? Please note that this technique is fairly simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Bmw Serie 1 F20. If it is a bulb on your rear turn signal, see our dedicated content page. However, here are the details of the simple steps to follow to be able to carry out this act properly depending on the method you wish to choose.

Change front turn signal bulb on your Bmw Serie 1 F20 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Bmw Serie 1 F20 by the new one (be sure to examine if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb operates.

    • Change the front turn signal bulb of your Bmw Serie 1 F20 through the wheel arch:

    This solution is extremely useful when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and take off the front wheel on the side you want to operate on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Bmw Serie 1 F20 through the bumper:

    On some years or finishes, based on the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will explain them right now:

    • Put your Bmw Serie 1 F20 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be vulnerable.
    • Remove your headlight block and change the front turn indicator bulb of your Bmw Serie 1 F20 following the steps seen in the parts seen earlier.
    • Put the whole thing back together again.

    If you need more tutorials on the Bmw Serie 1 F20, go to our Bmw Serie 1 F20 category.