Regardless whether for your own safety, for roadworthiness testing or to avoid a fine, making sure your turn signal bulbs are always functioning is imperative. In reality, bulbs are wearing parts that will predictably burn out in the future and as a consequence need to be changed. You’re most likely on this site because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Alfa Romeo Mito, we’ve written and published this document to help you do it without hiring somebody and not have to go to your repair shop. In a first step, we will take a look at controling a burnt-out front turn signal bulb on your Alfa Romeo Mito and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-alfa-romeo-mito

How to know if the front turn signal bulb on your Alfa Romeo Mito is burnt out or needs to be swapped out?

When you drive your car you don’t always have the opportunity to check all the safety components of your Alfa Romeo Mito. In reality, you are mostly in a hurry and tend to get into your car, make your trip and put it down immediately without taking the time to do an periodic check-up. It is therefore fundamental to take the time to occasionally check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Alfa Romeo Mito, but that you didn’t realize it. Here are the two simple ways to control if a front turn signal is burnt out or if you need to change it rather quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to control that they are working.
  • By listening to the sound of your blinkers. In reality, there is an audible indication on each car that informs you of a front turn indicator bulb burnt out on your Alfa Romeo Mito, you will find out that the time between each “click” is much closer, this means that you will have to change the front turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual control as on the first process shown previously.

You may have another bulb to change, like the one of your low beam or your position lights, don’t hesitate to consult our blog posts to help you to accomplish this replacing.

Replacing the front turn signal bulb on your Alfa Romeo Mito

Now let’s go to the main step of this document, how to replace the front turn signal bulb of your Alfa Romeo Mito? Please be aware that this process is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Alfa Romeo Mito. If it is a bulb on your rear turn signal, see our special document. However, here are the details of the steps to follow in order to accomplish this act correctly depending on the strategy you wish to choose.

Change front turn signal bulb on your Alfa Romeo Mito through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Alfa Romeo Mito by the new one (ensure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the brand-new front turn signal bulb functions.

    • Change the front turn signal bulb of your Alfa Romeo Mito through the wheel arch:

    This approach is particularly valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and change the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Change the front turn signal bulb of your Alfa Romeo Mito through the bumper:

    On some years or finishes, according to the options the only simple access you will have to change the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will point them now:

    • Put your Alfa Romeo Mito on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be delicate.
    • Remove your headlight block and change the front turn indicator bulb of your Alfa Romeo Mito following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    To discover more tips on the Alfa Romeo Mito, take a look at the Alfa Romeo Mito category.