Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these scenarios, there’s only one component of your vehicle to take responsibility – your headlights, as well often known as high beams. Nevertheless this adjustment might seem easy thanks to the thumbwheel on your dashboard, a whole adjustment is much more complex than this elementary manipulation, and in this article, we are going to find out how to adjust the headlights of your Volvo XC60? To do this, first we will find out why you need to adjust your high beams, and secondly how to adjust the headlights of your Volvo XC60.
Why adjust the headlights of your Volvo XC60?
So let’s begin our article with the benefit of adjusting the headlights of your Volvo XC60. For most people, our headlights are adjusted good enough, and they appear to light up enough after dark. Unfortunately this is not always the circumstance and looking at this setting, either because the headlights on your Volvo XC60 are not bright enough, or because you have the impression that they are too weak is a great idea .
Adjusting the high beams of your Volvo XC60 for safety
To begin with, the headlight adjustment of a Volvo XC60 must be done for a simple safety motive. Whether it’s for you, or for the other users you come across during your night trips. In actual fact, if you don’t see enough, the risk is to ignore an obstacle driving, or to predict a curve badly. Alternatively, if your headlights are too powerful, regardless if you are supposed to switch to low beam lights when you cross a vehicle, the time needed to make this switch will generally expose the driver in front of you to the headlight beam of your Volvo XC60 . It is consequently important for others as well as for you to have an optimal adjustment of your headlights.
Adjusting the headlights of a Volvo XC60 for legal reasons
In addition to safety, there is a law that supervises the power, the adjustment of motor vehicle headlights (articles R313-2 of the Highway Code), here is what it suggests: have between 2 and 4 headlights that illuminate at minimum 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be very same to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Volvo XC60?
We will now proceed to the part that concerns you the most in this article, how to adjust the headlights of his Volvo XC60? This setting might seem a bit difficult, but by simply following the recommendations you should be able to complete it without too much trouble.
Preparations to adjust the headlights of a Volvo XC60
To begin with, you’ll need to prepare your vehicle to adjust your high beams in good conditions, here are the preparations to put in place:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure carefully.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Take out all needless weight from the car, just one person should be in the driver’s seat.
.
The headlight adjustment of his Volvo XC60
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the steps to follow:
- Open your hood, locate the screws for horizontal and vertical control of the headlights of your Volvo XC60 (they are usually marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the projector on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, check that the headlights setting of your Volvo XC60 is logical, do not think twice to check it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Volvo XC60, please go through our article on this subject.
If perhaps you have any further questions about the Volvo XC60, do not hesitate to consult our Volvo XC60 category.
